Hi folks. I've got a FC3 system which was an upgrade from a FC1 setup. I'm now having trouble with cdrecord. It sees the drive, but refuses to write to it. I've included the screen grab. Any help would be appreciated. [root@lcomp5 ~]# cdrecord -scanbus Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla Note: The author of cdrecord should not be bothered with problems in this version. scsidev: 'ATA' devname: 'ATA' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Using libscg version 'schily-0.8'. cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling'). scsibus1: 1,0,0 100) 'SONY ' 'DVD RW DW-U54A ' '1.5a' Removable CD-ROM 1,1,0 101) * 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * [root@lcomp5 ~]# mycdrecord ringways-mp3.iso cdrecord: No write mode specified. cdrecord: Asuming -tao mode. cdrecord: Future versions of cdrecord may have different drive dependent defaults. cdrecord: Continuing in 5 seconds... Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 cdrecord: Success. Cannot open SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. cdrecord: For possible transport specifiers try 'cdrecord dev=help'. [root@lcomp5 ~]# cdrecord dev=help Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla Note: The author of cdrecord should not be bothered with problems in this version. Supported SCSI transports for this platform: Transport name: sg Transport descr.: Generic transport independent SCSI Transp. layer ind.: Target specifier: bus,target,lun Target example: 1,2,0 SCSI Bus scanning: supported Open via UNIX device: not supported Transport name: pg Transport descr.: SCSI transport for ATAPI over Parallel Port Transp. layer ind.: Target specifier: bus,target,lun Target example: 1,2,0 SCSI Bus scanning: supported Open via UNIX device: not supported Transport name: ATA Transport descr.: ATA Packet specific SCSI transport Transp. layer ind.: ATAPI: Target specifier: bus,target,lun Target example: ATAPI:1,2,0 SCSI Bus scanning: supported Open via UNIX device: not supported Transport name: ATA Transport descr.: ATA Packet specific SCSI transport using sg interface Transp. layer ind.: ATA: Target specifier: bus,target,lun Target example: 1,2,0 SCSI Bus scanning: supported Open via UNIX device: not supported Transport name: RSCSI Transport descr.: Remote SCSI Transp. layer ind.: REMOTE: Target specifier: rscsi@host:bus,target,lun Target example: REMOTE:rscsi@host:1,2,0 SCSI Bus scanning: supported Open via UNIX device: not supported [root@lcomp5 ~]# -- Gary Stainburn This email does not contain private or confidential material as it may be snooped on by interested government parties for unknown and undisclosed purposes - Regulation of Investigatory Powers Act, 2000
