On Tue, 2005-02-08 at 15:19 -0500, Scot L. Harris wrote: > On Tue, 2005-02-08 at 14:16, Douglas Frank wrote: > > I'm unable to reach local networks from the new fc3 box, that I've never > > had trouble with using other unixes (or Slackware for that matter). > > It's been my experience that simply kicking off routed or gated was all > > it took to make the world accessible. FC3 is different! > > > > We have several networks here at work and my question is, how do I set > > up the routing table to reach them? Example: > > > > 16.140.160/24 <-- fc3 box is on this one > > 16.47.32/24 > > 16.32.176/24 > > ..several others.. > > > > Here's the output of route(8): > > > > Kernel IP routing table > > Destination Gateway Genmask Flags Metric Ref Use Iface > > 16.140.128.0 16.140.128.238 255.255.255.0 UG 0 0 0 eth0 > > 16.140.128.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 > > 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 > > 0.0.0.0 16.140.128.238 0.0.0.0 UG 0 0 0 eth0 > > > > eth0 is 16.140.128.238 > > > > I can reach anything on the home network, 16.140.128, but nothing on any > > of the others. What have I screwed up/left out? > > Assuming the default gateway 16.140.128.238 knows about your other LANs > this should work. However it looks to me as if you have two default > gateways specified. The first entry in your list above appears to be > incorrect. The second entry is for your interface and is what will > handle your locally connected LAN. The third entry is provided by the > useless zeroconf code, should not cause any problems but does nothing > for you. The last entry is your actual default gateway. 16.140.128.238 isn't really his default gateway, it's his own IP address. This was due I think to finger trouble as Douglas now appears to have got things working. > If the other LANs you are trying to get to go through a different router > on the local lan then you will need to define routes to those routers > for those LANs. Yep. Paul. -- Paul Howarth <paul@xxxxxxxxxxxx>
