Steven W. Orr wrote:
I have had the same problem with Core1 and Core2. Now it's happening
again with Core3.
I have the following config:
Tyan K7 Thunder Dual processors Athlon MB with 3 SCSI drives and one IDE
drive used for backup.
Here's df:
513 > df -v
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 22G 14G 7.4G 65% /
/dev/sda1 99M 17M 78M 18% /boot
/dev/hda1 3.7G 324M 3.2G 10% /f
/dev/hda2 70G 60G 6.6G 91% /g
/dev/sdc1 8.4G 6.6G 1.5G 83% /home
/dev/sdb1 8.4G 6.2G 1.8G 79% /home2
/dev/sdc2 26G 6.0G 19G 25% /h
none 504M 0 504M 0% /dev/shm
/dev/sda6 9.9G 6.4G 3.1G 68% /usr
/dev/sda5 1011M 462M 499M 49% /var
514 >
When I reboot with Install Disk 1, I get the splash screen giving me the
choice of the (normal graphic or text) (install or upgrage). I choose
either. I get a few lines saying tha vmlinuz is loading and then the
whole process just stops dead. I am vershtumped.
Can someone please advise what to do or what additional info I need to
provide?
Uh, try adding "noapic" to the boot command. Dual Athlons sometimes
need that.
----------------------------------------------------------------------
- Rick Stevens, Senior Systems Engineer rstevens@xxxxxxxxxxxxxxx -
- VitalStream, Inc. http://www.vitalstream.com -
- -
- Tempt not the dragons of fate, since thou art crunchy and taste -
- good with ketchup. -
----------------------------------------------------------------------
