Help with iptables firewall rules

[Robert L Cochran <cochranb@xxxxxxxxxxxxx>]

I'm trying to allow my print server on 192.168.1.160 to communicate with 
my machine. Otherwise, I don't seem able to print to my Laserjet. It 
seems to be doing that by sending TCP packets to port 1023. So I added 
this rule to my firewall:

-A RH-Firewall-1-INPUT -p tcp -m state --state NEW -m tcp --dport 1023 
-j ACCEPT

But the packets still get rejected:

Feb  6 12:26:04 bobcp4 kernel: Packet dropped..IN=eth1 OUT= 
MAC=00:11:09:61:11:6b:00:c0:02:55:52:55:08:00 SRC=192.168.1.160 
DST=192.168.1.14 LEN=44 TOS=0x00 PREC=0x00 TTL=30 ID=34854 PROTO=TCP 
SPT=515 DPT=1023 WINDOW=1024 RES=0x00 ACK PSH SYN URGP=0

I also had 2 other rules:

# -A RH-Firewall-1-INPUT -s 192.168.1.160 -p tcp -m state --state 
NEW,ESTABLISHED,RELATED -j ACCEPT
# -A RH-Firewall-1-INPUT -s 192.168.1.160 -p udp -m state --state 
NEW,ESTABLISHED,RELATED -j ACCEPT

They are shown commented out, but when I uncommented them the effect was 
the same as above: again the packets were rejected and nothing printed.  
Any idea of what I am doing wrong? Port 631 is open.

Thanks

Bob Cochran