On Fri, 28 Jan 2005 12:12:48 -0800, Rick Stevens <rstevens@xxxxxxxxxxxxxxx> wrote: > Alan :) wrote: > > To all fedora gurus out there: > > > > SPECS: > > =================================================== > > OS.................................... Fedora 3 > > System................................ Gateway 2k > > Motherboard........................... Intel (Luxemburg) 915G Motherboard R0 > > NIC (Integrated in the motherboard)... Marvell Yukon Ethernet > > > > THE PROBLEM: > > =================================================== > > There appears that there's no support for this NIC from the FC3 distribution set. There are drivers at http://downloadfinder.intel.com/ for redhat only. > > > > > > Does anybody have a solution for this problem? > > Can anybody point me in the right direction? > > Try the sk98lin driver. Works for Marvell and Syskonnect. I don't have the same board, but I have the same NIC, and the sk98lin drivers worked for me as well. I did my installation as a new machine, and it detected it just fine. I didn't have to do anything special. If you turned on the NIC or added it somehow after the OS was built, then the modules may not be loaded, and you would have to use modprobe instead. -- David ----------------------------------------------------------------------- There are only 10 kinds of people in this world, those who understand binary, and those who don't.
