Hi,
I just have ADSL with a router D-LINK500G (192.168.1.1). It works
perfectly if I have a fixed IP adress (192.168.1.100). By te way, my
router is acting as a DHCP server.
Well now if via the GUI I say for eth0 : IP adress automatically
obtain...", and I reboot, FC2 , I have the error during boot :
Determining IP info for eth0 failed.
My router is still on so I can imagine that it is ready to give me an
dynamic IP ...And then, I cannot access even my router via ping :
network unreachable.
I install the dhcpd process, thinking that I missed a RPM. No change.
if you have an explanation, or link, be kind to provide it as looking in
the archives gave me no exact answer to my problem.
More technical information maybe useful below (with fixed IP adress) :
[root@localhost root]# netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0
eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0
eth0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0
eth0
[root@localhost root]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
[root@localhost root]# cat /etc/resolv.conf
search localdomain
nameserver 192.168.1.1
[root@localhost root]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:80:48:14:39:7B
inet addr:192.168.1.100 Bcast:192.168.1.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1159 errors:0 dropped:0 overruns:0 frame:0
TX packets:1084 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:787886 (769.4 Kb) TX bytes:94430 (92.2 Kb)
Interrupt:3 Base address:0xd400
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5064 errors:0 dropped:0 overruns:0 frame:0
TX packets:5064 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2122516 (2.0 Mb) TX bytes:2122516 (2.0 Mb)
Philippe
--
Philippe, Chiangmai, Thailand
