* Gain Paolo Mureddu <gmureddu@xxxxxxxxxxxxxx> [01-27-2005 22:41]:
> Matt Florido wrote:
>
> >Encountered my first minor problem with the installation of FC3. I
> >can't seem to obtain a higher resolution than 1024x768.
> >
> >FC3 is using the generic Vesa driver. I've attempted to change monitor
> >settings, but nothing will take. From what I've read, the Vesa is an
> >acceptable driver. Is there something I should attempt?
> >
> >
> >
> Could you please send me your xorg.conf file, so I could take a look and
> see if there's something wrong... I've got a couple ideas of where the
> problem might be located... Also, what are your monitor's values of
> hsync and vsync, those are VERY important too... And what's the maximum
> resolution your monitor supports?
>
I know for a fact this monitor supports at least 1152x864 because that's
the resolution I run it with a Win machine.
I've attempted to change the vsync/hsync settings to no avail. Here are
the monitor/video settings:
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Dell D1028L"
DisplaySize 300 230
HorizSync 31.0 - 70.0
VertRefresh 50.0 - 120.0
Option "dpms"
EndSection
Section "Device"
Identifier
"Videocard0"
Driver "vesa"
VendorName
"Videocard vendor"
BoardName "VESA driver (generic)"
EndSection
I'll attempt to also attach the entire config.
--
Matt
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Dell D1028L"
DisplaySize 300 230
HorizSync 31.0 - 70.0
VertRefresh 50.0 - 120.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "vesa"
VendorName "Videocard vendor"
BoardName "VESA driver (generic)"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
