-----Original Message----- From: Kam Leo [mailto:kam.leo@xxxxxxxxx] Sent: Wednesday, January 19, 2005 4:49 PM To: For users of Fedora Core releases Subject: Re: Trouble booting fresh Core 3 install On Wed, 19 Jan 2005 16:01:38 -0600, David Nelson <David.Nelson@xxxxxxxxxxxxxx> wrote: > Well, I haven't updated the BIOS and am unfamiliar with how to do so. Regarding RH8, I tried the upgrade to no avail so I just reformatted the disc to install FC3. That is where I am today. > > On the Hardware front, I'll take a look. The machine has a slave drive Maxtor HD and a Yamaha CD-RW internal attached. > > -----Original Message----- > From: Sergio fernandez [mailto:s.fernandez@xxxxxxxxxxxx] > Sent: Wednesday, January 19, 2005 9:38 AM > To: For users of Fedora Core releases > Subject: Re: Trouble booting fresh Core 3 install > > Have you tried updating the PC bios to the latest version. > Also Have you tried to do a clean install of FC3 and not upgrading RH8 > (be careful not to delete your work). Maybe just chuck in a spare hard > disk just to see if the upgrade path is the issue. > Try removing any hardware that is not needed for the initial install > and add them later. > Hope this helps > > On 19 Jan 2005, at 15:24, David Nelson wrote: > > > No, its the original standard CRT Micron. > > > > -----Original Message----- > > From: Sergio fernandez [mailto:s.fernandez@xxxxxxxxxxxx] > > Sent: Wednesday, January 19, 2005 9:22 AM > > To: For users of Fedora Core releases > > Subject: Re: Trouble booting fresh Core 3 install > > > > > > > > Are you using a flat screen display? > > > > > > On 19 Jan 2005, at 14:18, David Nelson wrote: > > > >> Unfortunately, adding these commands below did not help. I still see > >> a waterfall of multi-colored pixels. > >> > >> I'm at a total loss on this. Redhat 8.0 installed just fine with the > >> current hardware configuration. > >> > >> Any other ideas? I really want to stay with Linux. > >> > >> Thanks > >> Dave > >> > >> -----Original Message----- > >> From: Tony Dietrich [mailto:td@xxxxxxxxxxxxxxxxxxxx] > >> Sent: Tuesday, January 18, 2005 9:14 AM > >> To: David Nelson > >> Subject: Re: Trouble booting fresh Core 3 install > >> > >> > >> On Tuesday 18 Jan 2005 14:55, you wrote: > >>> Thanks for replying Tony. The waterfall happens directly and almost > >>> immediately after the GRUB boot command. Within a minute or two, it > >>> freezes to a static multi-colored screen of gibberish. > >>> > >>> I have seen reference to 'quiet' and rhgb' but where would those > >>> go/where > >>> would I remove them? They are not on the command line args in GRUB > >>> as > >>> viewed by typing 'e'. > >>> > >> OK > >> Sounds like there's some incompatibility between the hardware and FC. > >> > >> Try adding one or more of the following to your command line when you > >> boot > >> from grub (by pressing 'e'): > >> noapic > >> noide > >> noapm > >> > >> If neither of those work, try booting into single mode 'single' > >> and seeing if you can get into the machine. > >> > >> Any successes/failures, come back to me with reports :p > >> > >> -- > >> Tony Dietrich > >> ------------- > A Google search says that your pc is equipted with a 32MB nVidia Riva > TNT 2 graphics adapter. Seach the list archives for booting problems > with nVidia cards. Thx, will do -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list ----------------------------------------- The information in this communication, including any attachments, is intended only for the person or entity to which it is addressed and may contain confidential, proprietary, and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from all computers.
