On the drive you do not want to mount as /boot and / you will need to label them as something different using a rescue CD or the rescue mode on this install CD. Alternatively you can change the /etc/fstab to use the device instead of the label. Example; Change : LABEL=/ ... LABEL=/boot ... To {your system may be different} : /dev/hda5 ... /dev/hda1 ... You can find out the device assigned to your partitions with "df" or "mount". Have fun On Thu, 2005-13-01 at 10:29 +1100, david smethurst wrote: > hi all > i have mounted a second hdd which i installed fc3 > on my old drive i had fc2 > it wont mount the two drives obviously as both drives have the > same /boot, /, > how can i change the name of the second drive partitions so that they > will not conflict with the first > i have sda/1/2, sdb/1/2 > when i change the data across to sda then i will ghost it back to sdb as > i always get a geom_ error on that drive when i try to install onto it > please be obvious on your instructions as im a little in the dark, so to > speak > thanks > david