Re: HP656C printing blank pages

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



John and Grace Lew wrote:

Hi David,
1. Yes, I leave it plugged in. So when I boot up with
WinXP, I can print. And in Fedora, when I try to print
(even a text file), the printer does respond, but only
by spitting out a page.
2.
[root@localhost /]# sbin/lsusb
Bus 005 Device 002: ID 03f0:2304 Hewlett-Packard
DeskJet 656c
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
[root@localhost /]# cd /etc/sysconfig
[root@localhost sysconfig]# less hwconf

... includes the following:

-
class: PRINTER
bus: USB
detached: 0
driver: unknown
desc: "Hewlett-Packard DeskJet 656c"
usbclass: 7
usbsubclass: 1
usbprotocol: 2
usbbus: 5
usblevel: 1
usbport: 0
usbdev: 2
vendorId: 03f0
deviceId: 2304
usbmfr: HEWLETT-PACKARD
usbprod: DESKJET 656C
-
Interesting that the driver says 'unknown'?

3.
[root@localhost sysconfig]# rpm -qa | grep hp
php-4.3.9-3
rhpl-0.148-1
php-mysql-4.3.9-3
hpoj-0.91-9
hpijs-1.6-2
php-pear-4.3.9-3

4. Yes it is configured with 'Printer configuration'.
There are 3 queues: deskjet-656c-1; usblp0;
usb-printing-interface-1.
The usblp0 is selected as default. I try to do a Test
ASCII text printout. The printer spits out a blank
page, and I'm prompted with the question: "Sent ASCII
text test page to 'usblp0' queue.  Does it look
okay?". I select No and I get the following details:




John,
Well you have no connection problems so its the configuration,you have the required rpms
in hpoj,hpijs,the /etc/sysconfig/hwconf 'driver unknown'is normal as hardware is detected before
software drivers are loaded.
The way I try and fix mine it is to:-


1) delete all your printer queues [so many cloud the issue and confuse for one printer] and close your
printer configuration
2) as root run 'ptal-init setup'
3) when asked by ptal for a <queue name> use [for example] HP-656c and just use 'enter' to all others,
when complete you "should" see 'mlc:usb:<queue name>' as default device.
4) start up printer configuration and the <queue name> "should" be under the queue name less 'mlc:usb'
5) When the set up is complete use the 'cups test page' in 'Test'.


     Good luck        david








[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux