Thanks very much Dave. I was able to remove the "quiet" as you suggested. The boot process messages look good up until I see the message "Configuring kernel parameters:" on a line by itself. That is the last message that I see when it hangs. I can hit return and see line feeds at this point, but nothing else seems to be going on (no hard drive activity, etc.). Any further thoughts or suggestions (Dave or anyone else)? Thanks for your help, Ned On Sat, 1 Jan 2005 14:55:23 -0500, Dave Jones <davej@xxxxxxxxxx> wrote: > On Sat, Jan 01, 2005 at 02:50:42PM -0500, Ned Voorhees wrote: > > Below are the messages shown on the screen at boot time: > > --- snip --- > > Booting 'Fedora Core (2.6.9-1.667)' > > root (hd0,0) > > Filesystem type is ext2fs, partition type 0x83 > > kernel /vmlinuz-2.6.9-1.667 ro root=/dev/VolGroup00/LogVol00 rhgb quiet > > [Linux-bzImage, setup=0z1400, size=0x155da5] > > initrd /initrd-2.6.9-1.667.img > > [Linux-initrd@0x7ef3000, 0xecfed bytes] > > --- snip --- > > > > The above is all that is shown on the screen when the boot process > > hangs. If anyone has any suggestions on what I might want to do or > > check, I would very much appreciate it. > > When you get to the bootloader screen, if you press 'e' you > can edit the command line, and remove 'quiet' from it. > You'll then see all the kernel messages, and see exactly where > it hangs. > > Dave (hating 'quiet' more and more each day) > >
