Thank you ... dhclient outputs the following: # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # [root@localhost ~]# dhclient Internet Systems Consortium DHCP Client V3.0.1 Copyright 2004 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/products/DHCP sit0: unknown hardware address type 776 sit0: unknown hardware address type 776 Listening on LPF/sit0/ Sending on LPF/sit0/ Listening on LPF/eth0/00:c0:9f:42:33:e6 Sending on LPF/eth0/00:c0:9f:42:33:e6 Listening on LPF/lo/ Sending on LPF/lo/ Sending on Socket/fallback DHCPDISCOVER on sit0 to 255.255.255.255 port 67 interval 7 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 8 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on sit0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 8 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on sit0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on sit0 to 255.255.255.255 port 67 interval 21 DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on sit0 to 255.255.255.255 port 67 interval 3 No DHCPOFFERS received. No working leases in persistent database - sleeping. # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # Any idea what I can do now to get eth0 to work under the new kernel? On Wed, 2004-12-22 at 09:44 +0000, Paul Howarth wrote: > Maciek R. wrote: > > Someone told me to run dhcpcd as root in order to get dhcp response for > > my eth0. There is no command dhcpcd, why not? I searched for this file > > in /sbin but found nothing. > > Anybody an idea whether there is a similar file on FC 3? > > FC3 uses the dhclient package instead. > > See "man 8 dhclient" > > Paul. > -- Maciek R. <m.mail@xxxxx>
