change 192.168.1.1 to 127.0.0.1 On Thu, 16 Dec 2004, Joseph McCrary wrote: > hosts: > > # Do not remove the following line, or various programs > # that require network functionality will fail. > 192.168.1.1 localhost.localdomain localhost > > hosts.conf: > > order hosts,bind > > Tom Ryan wrote: > > lets check everything.. > > whats in /etc/hosts > > On Thu, 16 Dec 2004, Joseph McCrary wrote: > > > > [joe@localhost ~]$ lpstat -h localhost -a > lpstat: Unable to connect to server: Connection refused > [joe@localhost ~]$ > > > Actually, the entire client.conf seems to be commented out: > > # > # "$Id: client.conf,v 1.8 2004/02/25 20:15:27 mike Exp $" > # > # Sample client configuration file for the Common UNIX Printing System > # (CUPS). > # > # Copyright 1997-2004 by Easy Software Products, all rights reserved. > # > # These coded instructions, statements, and computer programs are the > # property of Easy Software Products and are protected by Federal > # copyright law. Distribution and use rights are outlined in the file > # "LICENSE.txt" which should have been included with this file. If this > # file is missing or damaged please contact Easy Software Products > # at: > # > # Attn: CUPS Licensing Information > # Easy Software Products > # 44141 Airport View Drive, Suite 204 > # Hollywood, Maryland 20636-3111 USA > # > # Voice: (301) 373-9603 > # EMail: cups-info@xxxxxxxx > # WWW: http://www.cups.org > # > > ######################################################################## > # # > # This is the CUPS client configuration file. This file is used to # > # define client-specific parameters, such as the default server or # > # default encryption settings. # > # # > ######################################################################## > > # > # ServerName: the hostname of your server. By default CUPS will use the > # hostname of the system or the value of the CUPS_SERVER environment > # variable. ONLY ONE SERVER NAME MAY BE SPECIFIED AT A TIME. To use > # more than one server you must use a local scheduler with browsing > # and possibly polling. > # > > #ServerName myhost.domain.com > > # > # Encryption: whether or not to use encryption; this depends on having > # the OpenSSL library linked into the CUPS library. > # > # Possible values: > # > # Always - Always use encryption (SSL) > # Never - Never use encryption > # Required - Use TLS encryption upgrade > # IfRequested - Use encryption if the server requests it > # > # The default value is "IfRequested". This parameter can also be set > # using the CUPS_ENCRYPTION environment variable. > # > > #Encryption Always > #Encryption Never > #Encryption Required > #Encryption IfRequested > > > # > # End of "$Id: client.conf,v 1.8 2004/02/25 20:15:27 mike Exp $". > # > > > Tom Ryan wrote: > > do you have a "servername" variable in client.conf? > > if so, comment that out.. > > what does > > lpstat -h localhost -a > > show? > > On Thu, 16 Dec 2004, Terry Polzin wrote: > > > > On Thursday 16 December 2004 10:49, Joseph McCrary wrote: > > > Please help. If I cannot fix this printing problem, I will have to > abandon Linux for the hated world of Windoze!!! > > Two weeks ago, I no longer could send a document to either printer. I've > got two printers connected, both of which used to work fine. One is a > Canon S600 connected to a USB port. The other is a HP LJ 6MP connected > through my local network. Both worked fine previously. > > Whenever I try to print from a program (e.g., Firefox), the only printer > available is the PostScript default. Previously, both printers were > listed, with the HP as the default printer. > > When I try to print a test page, I get this error: > > lpr: error - unable to print file: server-error-service-unavailable > > I'm running Core 3, and have done all of the updates. I downloaded and > installed the latest version of CUPS (1.1.22). That did not help. > > Here are the last few lines from cups.conf: > > # Encryption: whether or not to use encryption; this depends on having > # the OpenSSL library linked into the CUPS library and scheduler. > # > # Possible values: > # > # Always - Always use encryption (SSL) > # Never - Never use encryption > # Required - Use TLS encryption upgrade > # IfRequested - Use encryption if the server requests it > # > # The default value is "IfRequested". > # > > <Location /> > Order Deny,Allow > Deny From All > Allow From 127.0.0.1 > </Location> > > #<Location /classes> > # > # You may wish to limit access to printers and classes, either with Allow > # and Deny lines, or by requiring a username and password. > # > #</Location> > > #<Location /classes/name> > # > # You may wish to limit access to printers and classes, either with Allow > # and Deny lines, or by requiring a username and password. > # > #</Location> > > #<Location /jobs> > # > # You may wish to limit access to job operations, either with Allow > # and Deny lines, or by requiring a username and password. > # > #</Location> > > #<Location /printers> > # > # You may wish to limit access to printers and classes, either with Allow > # and Deny lines, or by requiring a username and password. > # > #</Location> > > #<Location /printers/name> > # > # You may wish to limit access to printers and classes, either with Allow > # and Deny lines, or by requiring a username and password. > # > > ## Anonymous access (default) > #AuthType None > > ## Require a username and password (Basic authentication) > #AuthType Basic > #AuthClass User > > ## Require a username and password (Digest/MD5 authentication) > #AuthType Digest > #AuthClass User > > ## Restrict access to local domain > #Order Deny,Allow > #Deny From All > #Allow From .mydomain.com > #</Location> > > <Location /admin> > # > # You definitely will want to limit access to the administration functions. > # The default configuration requires a local connection from a user who > # is a member of the system group to do any admin tasks. You can change > # the group name using the SystemGroup directive. > # > > AuthType Basic > AuthClass System > > ## Restrict access to local domain > Order Deny,Allow > Deny From All > Allow From 127.0.0.1 > > #Encryption Required > </Location> > > # > # End of "$Id: cupsd.conf.in,v 1.16 2004/08/18 17:53:47 mike Exp $". > # > <Location /printers/usblp0> > Order Deny,Allow > Deny From All > Allow From 127.0.0.1 > AuthType None > </Location> > <Location /printers/s600-4> > Order Deny,Allow > Deny From All > Allow From 127.0.0.1 > AuthType None > </Location> > # Lines below are automatically generated - DO NOT EDIT > <Location /printers/Canon> > Order Deny,Allow > Deny From All > Allow From 127.0.0.1 > AuthType None > Allow from All > </Location> > <Location /printers/HP> > Order Deny,Allow > Deny From All > Allow From 127.0.0.1 > AuthType None > Allow from All > </Location> > Browsing On > BrowseProtocols cups > BrowseOrder Deny,Allow > BrowseAllow from @LOCAL > BrowseAddress 255.255.255.255 > Listen *:631 > > > Please help. > > Joe > > > OK lets start with the basics, is the cups daemon running? Set to start at > startup? > ps -ef | grep cups > /sbin/chkconfig --list cups > > If you do indeed see a cupsd in the output of the ps command, and runlevels > 2345 are set to on the chkconfig output. Then run system-config-printers and > make sure that your printers are configured correctly. Delete them and > reconfigure if required. Test print from the printer config. Post the > resutls. > > -- > fedora-list mailing list > fedora-list@xxxxxxxxxx > To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list > > > > _______________________________________________________________________ > Tom Ryan Voice: 856-225-6361 > Consulting System Administrator Fax: 856-969-7900 > Rutgers School of Law - Camden IT Help Desk: 856-225-2343 > > > > > > > > _______________________________________________________________________ > Tom Ryan Voice: 856-225-6361 > Consulting System Administrator Fax: 856-969-7900 > Rutgers School of Law - Camden IT Help Desk: 856-225-2343 > > > > > _______________________________________________________________________ Tom Ryan Voice: 856-225-6361 Consulting System Administrator Fax: 856-969-7900 Rutgers School of Law - Camden IT Help Desk: 856-225-2343
