Well I don't have that file. I have /boot/grub/device.map. That file has (fd0) /dev/fd0 (hd0) /dev/hda --Louis > see what's listed in your /boot/grub/devices file > > > Louis Garcia wrote: > > > > That doesn't explain why grub would hang. My problem is before initrd > > and the kernel. I can't even get to grub. > > > > --Louis > > > > > > My guess would be that the initrd file was created with a config to > > > load the wrong module for your RAID. I would try manually loading > > > modules from a rescue disk, when you find the right one, put it in > > > your /etc/modprobe.conf file and then recreate your initrd file. > > > > > > > Louis Garcia wrote: > > > > > > > > I installed a minimum fc3 on a PII box. It has an ide boot drive (hda) > > > > and two scsi HD (sda, sdb) in a raid config. The boot loader is in the > > > > MBR of hda. The install goes fine but when it comes to booting up it > > > > hangs right before the grub screen. If I take out the scsi card it boots > > > > fine (except it complains about missing raid discs). This is a Gateway > > > > G6 with an Adaptec aha-2940 UW. Any thought? > > > > > > > > Thanks, --Louis
