Hmm, previous post seems to have disappeared into the ether, apologies if it ever surfaces... Hi, I installed FC3 on a new machine with relatively little problems. I did need to add NOPROBE to the install boot prompt and manually add hardware but otherwise all was well. On reboot though things freeze after: Initializing hardware... storage network audio Looking at the list archives I see references to issues with rhgb, udev and video mode. So I've tried: 1. Removing 'rhgb quiet' from the kernel command line 2. Forcing a boot into run level 3, both by adding '3' to the command line but also by changing inittab after doing a rescue boot to get at the filesystem 3. Verified udev_logging=no is set in /etc/udev/udev.conf 4. Just for kicks I did a rescue boot from the DVD, chroot'ed into the environment and ran up2date. This pulled down a host of updated packages including a new rhgb, udev and kernel. None of this has worked and I'm at a bit of a loss. The machine is a dual boot with WinXP which works fine. I also just tried the new SuSE Live CD which boots happily and sees all the hardware. Machine is: MSI K8N Nforce3 250gb socket 754 mobo Athlon64 3400+ 512Mb Crucial PC3200 RAM in 1 stick Asus FX5700 128Mb graphics card 200Gb WD SATA drive IDE DVD burner Any pointers much appreciated. Garry
