V sre, 01.12.2004 ob 03:36 je Jim Cornette napisal(a): > Sasa Stupar wrote: > > >>https://freedesktop.org/bugzilla/show_bug.cgi?id=1817 > > > > > > This bug explains only for install problems. I didn't have install > > problems at all. It went well under X. > > > > > >>https://freedesktop.org/bugzilla/ > >>should get you there with this blank screen when system is cold-booted. > >> > >>I did have a problem with a black screen that seemed like the computer > >>was locked up. The computer finally brought up the X screen after a long > >>wait. Have you let the screen remain black, then check back a few > >>minutes later? > > > > > >>Jim > > > > > > Yes, I have waited for 30 min but nothing. The system froze because HDD > > led was allways on. > > > > Could this be related to BIOS? Because, after cold-boot to winxp and > > reboot to FC2 it works or cold-boot in linux but in "Interactive mode". > > I'm not sure why a cold-boot would leave the computer in a state where > the disk was hung, except for a problem someone mentioned regarding a > bug that effects the graphical boot with the initial install. Did you > upgrade to the latest available rpms from the mirror sites. > > You might try to boot with rhgb removed from the grub loader. There are > many postings that explained this problem and how to remove rhgb quiet > from the boot parameters. > > Your assumption that the BIOS might have a bug revealed by linux > cold-booting might be close too. I have an 815 video card (lesser than > your card type) and also used an 865G (newer than the 845). Both of > these cards do exhibit effects, which put the card into a particular > state, until the computer is rebooted. This might explain why the video > card you have works after being initialized by windows. The card is > locked in the correct state. > > This still sounds like a good candidate for either submitting a bug in > bugzilla for Fedora or on the xorg-x11 site. > > I'm concerned that the X server uses the same driver for so many card > types and the list is growing still. (i810) - Your breakage with this > card might help resolve the refresh problem that the 810/815 type cards > are having. > > Jim > > Jim, you are a saver. I have removed "rhgb quiet" from the grub.conf and now it is working fine - booting directly to X even with cold start. Thank you. :) Sasa
Attachment:
signature.asc
Description: To je digitalno podpisani del =?iso-8859-2?Q?sporo=E8ila?=
