During the start up I see the Failure red mark during loading of the ADSL system (that was working on FC2):
The card is recognized as from the output of sbin/lspci
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02 )
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02)
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:0f.0 Multimedia video controller: 3Dfx Interactive, Inc. Voodoo 2 (rev 02)
00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
00:11.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
00:12.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH A1 IS DN [Fritz] (rev 02)
01:00.0 VGA compatible controller: S3 Inc. 86c368 [Trio 3D/2X] (rev 02)
[antonio@Fedora ~]$
From the kernel start-up log I see:
ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 2.46.2.5 HiSax: Layer2 Revision 2.30.2.4 HiSax: TeiMgr Revision 2.20.2.3 HiSax: Layer3 Revision 2.22.2.3 HiSax: LinkLayer Revision 2.59.2.4 pnp: Device 00:01.00 activated. pnp: Device 00:01.01 activated.
This is my modprobe.conf:
# Note: for use under 2.4, changes must also be made to modules.conf!
alias eth0 ne2k-pci
alias eth1 ne2k-pci
#alias eth2 hisax
#alias snd-card-0 sb
alias usb-controller uhci-hcd
options scanner vendor=0x04b8 product=0x010b #install sound-slot-0 /sbin/modprobe --first-time --ignore-install sound-slot-0 && { /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :; }
#remove sound-slot-0 { /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :; } ; /sbin/modprobe -r --first-time --ignore-remove sound-slot-0
alias snd-card-0 snd-sb16
install snd-sb16 /sbin/modprobe --ignore-install snd-sb16 && /usr/sbin/alsactl restore >/dev/null 2>&1 || :
remove snd-sb16 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-sb16--
and this is my /etc/modules.conf
alias eth0 ne2k-pci
alias eth1 ne2k-pci
alias eth2 hisax
alias sound-slot-0 sb
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :
alias usb-controller usb-uhci
options scanner vendor=0x04b8 product=0x010b # Note: for use under 2.6, changes must also be made to modprobe.conf!
and the output of my lsmod is: Module Size Used by parport_pc 24705 1 lp 11565 0 parport 41737 2 parport_pc,lp autofs4 24005 0 i2c_dev 10433 0 i2c_core 22081 1 i2c_dev sunrpc 160421 1 ppp_synctty 10433 0 ppp_async 11585 1 crc_ccitt 2113 1 ppp_async ppp_generic 35669 6 ppp_synctty,ppp_async slhc 7105 1 ppp_generic ipt_MASQUERADE 3521 1 iptable_nat 23045 2 ipt_MASQUERADE iptable_mangle 2753 0 ipt_state 1857 2 ip_conntrack 40693 3 ipt_MASQUERADE,iptable_nat,ipt_state iptable_filter 2753 1 ip_tables 16193 5 ipt_MASQUERADE,iptable_nat,iptable_mangle,ipt_state,iptable_filter microcode 6497 0 vfat 14785 1 fat 45409 1 vfat dm_mod 54741 0 md5 4033 1 ipv6 232705 24 uhci_hcd 31449 0 ns558 5441 0 gameport 4801 1 ns558 snd_sb16 12717 3 snd_opl3_lib 11201 1 snd_sb16 snd_sb16_dsp 14913 1 snd_sb16 snd_pcm_oss 47608 1 snd_mixer_oss 17217 2 snd_pcm_oss snd_pcm 97993 2 snd_sb16_dsp,snd_pcm_oss snd_timer 29765 2 snd_opl3_lib,snd_pcm snd_page_alloc 9673 1 snd_pcm snd_sb16_csp 23233 1 snd_sb16 snd_sb_common 18369 3 snd_sb16,snd_sb16_dsp,snd_sb16_csp snd_hwdep 9413 2 snd_opl3_lib,snd_sb16_csp snd_mpu401_uart 8769 1 snd_sb16 snd_rawmidi 26725 1 snd_mpu401_uart snd_seq_device 8137 2 snd_opl3_lib,snd_rawmidi snd 54053 15 snd_sb16,snd_opl3_lib,snd_sb16_dsp,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_sb16_csp,snd_sb_common,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device soundcore 9889 3 snd ne2k_pci 8865 0 8390 11841 1 ne2k_pci floppy 58609 0 ext3 116809 2 jbd 74969 1 ext3
I do not see any ISDN module??? what does it mean and how to solve it???
What shall I investigate further??
Tnx
Antonio M.
===================================================================
Working with Mozilla Thunderbird 0.9 on Redhat Linux Fedora Core 3
===================================================================
===================================================================
Uso Mozilla Thunderbird 0.9 su Redhat Linux Fedora Core 3
www.montagnani.org
===================================================================