|
Hi,
My PC suffers from HDD dma problem
almost everyday. Motherboard is Gigabyte GA7DXR, HDD is Seagate
ST3160023A.
Output of lspci is:
00:00.0 Host bridge: Advanced Micro Devices [AMD]
AMD-760 [IGD4-1P] System Controller (rev 13)
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] AGP Bridge 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01) 00:0d.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) 00:0e.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02) 00:10.0 Unknown mass storage controller: Promise Technology, Inc. PDC20265 (FastTrak100 Lite/Ultra100) (rev 02) 01:05.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF/SG AGP 02:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05) 02:05.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05) This is a portion of my logwatch mail message (i
can provied the /var/log/messages as well if needed).
Buffer I/O error on device hdh4,
...: 10 Time(s)
RPC: error 5 connecting to ...: 1 Time(s) end_request: I/O error, dev hdh, sector...: 468 Time(s) hdh: DMA timeout error...: 2 Time(s) hdh: dma timeout error: status=0x00 { }...: 1 Time(s) hdh: dma timeout error: status=0xd0 { B...: 1 Time(s) hdh: read_intr: error=0x04 { DriveStat...: 4 Time(s) hdh: read_intr: status=0x51 { DriveReady SeekComplete Error }...: 4 Time(s) ide3: reset: master: error (0x00?)...: 2 Time(s) lost page write due to I/O error on hdh4...: 10 Time(s) And a lot of following messages
Nov 26 04:07:23 end_request: I/O error, dev hdh, sector 13071628
Nov 26 04:07:23 end_request: I/O error, dev hdh, sector 13071636 Nov 26 04:07:23 end_request: I/O error, dev hdh, sector 13071644 Nov 26 04:07:23 end_request: I/O error, dev hdh, sector 13071652 Nov 26 04:07:23 end_request: I/O error, dev hdh, sector 13071660 Nov 26 04:07:23 end_request: I/O error, dev hdh, sector 13071668 Nov 26 04:07:23 end_request: I/O error, dev hdh, sector 13071676 Nov 26 04:07:23 end_request: I/O error, dev hdh, sector 13071684 Nov 26 04:07:23 end_request: I/O error, dev hdh, sector 13071692 Nov 26 04:07:23 end_request: I/O error, dev hdh, sector 13071700 Nov 26 04:07:23 end_request: I/O error, dev hdh, sector 13071708 Nov 26 04:07:23 end_request: I/O error, dev hdh, sector 13071716 Nov 26 04:07:23 end_request: I/O error, dev hdh, sector 13071724 Nov 26 04:07:23 end_request: I/O error, dev hdh, sector 13071732 Nov 26 04:07:23 end_request: I/O error, dev hdh, sector 13071740 Nov 26 04:07:23 end_request: I/O error, dev hdh, sector 13071748 Nov 26 04:07:23 end_request: I/O error, dev hdh, sector 13071756 Nov 26 04:07:23 end_request: I/O error, dev hdh, sector 13071764 I am running kernel "2.6.9-1.681_FC3" with "noapic nolapic acpi=off". I ran Segate's own Seagate Tools for surface scan - No problem found. I ran smartctl -t long /dev/hdh for SMART extensive test. No problems there either. Any ideas???
Regards from
VJ
|
