Hi, I'm using both vanilla FC3 and rawhide FC3 with an 8 in 1 drive on both machines which is registered happily in /proc/bus/usb/devices (see below). Question is, how do I mount anything put into it - I can't see anything obvious and I thought that FC3 was supposed to automount anything placed into it. T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.9-1.667 uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.2 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=55aa ProdID=b012 Rev= 1.01 S: Manufacturer= S: Product=8-in-2 S: SerialNumber=38C3EFFD8D C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb- storage E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms /sbin/lsusb gives Bus 004 Device 002: ID 55aa:b012 OnSpec Electronic, Inc. Bus 004 Device 001: ID 0000:0000 Bus 003 Device 002: ID 04e8:3242 Samsung Electronics Co., Ltd Bus 003 Device 001: ID 0000:0000 Bus 002 Device 004: ID 0ac8:0301 Z-Star Microelectronics Corp. Bus 002 Device 002: ID 050d:0002 Belkin Components Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 To me, this looks like there is a problem in udev with the manufacturer name not being transfered and also in FC3 not mounting correctly. Any ideas? TTFN Paul -- "I'm gonna hit the highway like a battering ram with a Cilla Black fan on the bike" - Meatloaf
