Hi all, I switched from RH8 to FC1 some time ago. After that my USB-camera, which is connected to the PC with 2 single-port extension cables, didn't work anymore. Versions FC2 and FC3-test3 (that I am running now) have the same problem. Is there a solution to this problem? Here's some output that may be of any help: Nothing connected: [root@amdrvk ~]# lsusb Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 After connecting the extension cables with and the camera: [root@amdrvk ~]# lsusb Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 006: ID 0416:5518 Winbond Electronics Corp. 4-Port Hub Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 [root@amdrvk ~]# tail /var/log/messages Nov 12 23:32:54 amdrvk kernel: usb 2-2: new full speed USB device using address 6 Nov 12 23:32:54 amdrvk kernel: hub 2-2:1.0: USB hub found Nov 12 23:32:54 amdrvk kernel: hub 2-2:1.0: 4 ports detected Nov 12 23:32:55 amdrvk kernel: usb 2-2.2: new full speed USB device using address 7 Nov 12 23:32:55 amdrvk kernel: usb 2-2.2: can't connect bus-powered hub to this port I tried this on 2 PC's. Both have the same problem. And on both PC's the camera was working fine with RED HAT 8 so I would say it's not a hardware issue! Thanks, Mark -- Mark Reuvekamp fedora@xxxxxxxxxxxxxxxxx The Netherlands http://www.xs4all.nl/~kawazr7 Kawasaki ZR-7 - MuZ Skorpion Sport - MZ Baghira Black Panther
