Just added a SCSI card and TLZ10 tape drive to a system - getting the
following message below. Is this a known bug in FC2? Running kernel
2.6.5-1.358.
TIA
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2930CU SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
(scsi0:A:5): 10.000MB/s transfers (10.000MHz, offset 15)
Vendor: DEC Model: TLZ10 (C) DEC Rev: 04a8
Type: Sequential-Access ANSI SCSI revision: 02
st: Version 20040318, fixed bufsize 32768, s/g segs 256
Attached scsi tape st0 at scsi0, channel 0, id 5, lun 0
st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA
1048575
st0: Block limits 1 - 16777215 bytes.
Debug: sleeping function called from invalid context at
include/asm/semaphore.h:119
in_atomic():0, irqs_disabled():1
Call Trace:
[<0211691d>] __might_sleep+0x80/0x8a
[<129569c9>] ahc_linux_kill_dv_thread+0x4f/0x7b [aic7xxx]
[<1295b7b0>] ahc_linux_exit+0x18/0x2e [aic7xxx]
[<02126b19>] sys_delete_module+0x122/0x162
[<02137c1f>] unmap_vma_list+0xe/0x17
[<02137f64>] do_munmap+0xfe/0x108
[<02114408>] do_page_fault+0x0/0x446
