RE: Dell Ultra Sharp 2001FP Flat Panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Here is an XF86Config (or xorg.conf in FC2) file for the 2001FP (with
dualview) on an NVIDIA FX500:


# XFree86 4 configuration created by redhat-config-xfree86
#
Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	InputDevice    "DevInputMice" "AlwaysCore"
EndSection

Section "Files"
# RgbPath is the location of the RGB database.  Note, this is the name
of the 
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
EndSection

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option	    "XkbRules" "xfree86"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "gb"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "PS/2"
	Option	    "Device" "/dev/psaux"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "no"
EndSection

Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
	Identifier  "DevInputMice"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "no"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Dell D1028L"
	DisplaySize  300	230
	HorizSync    31.0 - 80.0
	VertRefresh  56.0 - 76.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "nvidia"
	VendorName  "Videocard vendor"
	BoardName   "NVIDIA Quadro FX 500 (nvidia proprietary)"
	Option	    "TwinView"
 	Option      "MetaModes"		"1600x1200,1600x1200"
	Option	    "HorizSync"		"31.0-80.0"
	Option      "VertRefresh"	"56.0-76.0"
	Option	    "Xinerama"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     16
	SubSection "Display"
		Depth     16
		Modes    "1600x1200" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection

-----Original Message-----
From: Usman S. Ansari [mailto:uansari@xxxxxxxxx]
Sent: 02 November 2004 15:44
To: fedora-list@xxxxxxxxxx
Subject: Dell Ultra Sharp 2001FP Flat Panel


I have Fedora Core 2 running fine until my monitor died. I decided to
by "Dell Ultra Sharp 2001FP Flat Panel" on recommendation of my
friend.

When booting, I was hoping that kudzu will kick in and reconfigure for
new monitor. It did not.

When I start X on the computer, I get following message from the
monitor

"1:D-SUB cannot display this mode"

How can I configure it ?

I try to start "system-config-display", but get same message above.

I connected this monitor to another (old) computer and started install
process and it did reconize it as

"2001FP (analog)"

So FC 2 does know how to talk (install fails due to disk space
problem).

Any suggestions, how can I configure this monitor for my main PC.

Usman
http://www.beconvinced.com

-- 
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list


[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux