> -----Original Message----- > From: fedora-list-bounces@xxxxxxxxxx > [mailto:fedora-list-bounces@xxxxxxxxxx] On Behalf Of Chris Marsh > Sent: Friday, 29 October 2004 10:36 > To: 'For users of Fedora Core releases' > Subject: RE: IP Addresses > > > > > -----Original Message----- > From: fedora-list-bounces@xxxxxxxxxx > [mailto:fedora-list-bounces@xxxxxxxxxx] > On Behalf Of Stewart Nelson > Sent: Thursday, 28 October 2004 7:25 PM > To: fedora-list@xxxxxxxxxx > Subject: Re: IP Addresses > > On Thu, October 28, 2004 12:54, Chris Marsh said: > > >> Now, I'm setting > >> up > >> an FC2 box to act as my website and Email server. I want > to take over > >> from the Hosting Company. > >> > >> Currently, my FC2 Box is connected via the ADSL Modem and > has the IP > >> Address 10.0.0.3. My problem is, how do I 'see' this box from the > >> internet? > > > You need to change the settings of your router to foward certain > > ports. e.g. for your web server, the router has to forward > port 80 to > > 10.0.0.3. > > You need to be sure that the FC2 box always gets the same > private address. In your present system, after a power > failure, you might have the FC2 box at, say, 10.0.0.2. One > way is to manually assign FC2 a static IP, e.g. 10.0.0.140, > that is outside of the range handed out by DHCP. Or, if your > modem/router supports static DHCP, set it so that the NIC of > your FC2 (identified by its MAC address) always gets the same IP. > > You also need to make www.ausmarsh.com point to your public > IP address. If your public IP is static, and you will be > keeping an account with Hosting Shop, just have them change > the DNS entry. If you will no longer be dealing with H.S., > you could have your registrar or a third party provide DNS > for ausmarsh.com, or you could run your own DNS on FC2. > > If your IP is dynamic, you can use dyndns.org or a similar > service. Running an email server from a dynamic IP is not > generally recommended. > > --Stewart > > ATM, My IP is dynamic. I don't have with DNS Changing etc. > It's purely the mechanics of setting up the Router to pass > all HTTP requests through to the server, on 10.0.0.3 (this > will stay the same). As someone else rightly pointed out, I > have a Speedtouch 510. I've tried to dowload the config file > but I don't know where to edit of what to edit it with! I've > found a manual on the internet for this, I'll read it first... > > Chris > Chris; I provided example changed config lines in the ogiginal reply. You can edit the config with a text editor (either vi or notepad or whatever). The line you need to add in the "nat.ini" section for the mapping is: create protocol=tcp inside_addr=10.0.0.3:80 outside_addr=0.0.0.0:80 foreign_addr=0.0.0.0:0 Hope this helps... You can also edit this in the GUI under the "NAPT" entrys. Regards David. > -- > fedora-list mailing list > fedora-list@xxxxxxxxxx > To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list >
