On Mon, 2004-10-18 at 12:34 -0400, Jared Bloomer wrote: > I am currently using Redhat 9 because I had trouble with FC1 not > supporting my network card. > > My Network card is : Xircom RBEM56G-100 NIC/56k modem > > I was just curious if FC2 supports this card now, cus without it I have > no way of getting online. > Jared, I did a google on this and after quite a few misses, came up with this. [pcmcia-cs driver: tulip_cb] [x86,ppc] [2.4+ kernel driver: xircom_cb] [ ethernet only ] Silicom FEM56 Fast Ethernet [ Not recommended: support is experimental and unreliable ] IBM EtherJet CardBus with 56K Modem Xircom RBEM56G-100BTX, CBEM56G-100BTX, R2BEM56G-100 Note that it says it is experimental. It was from this page: http://pcmcia-cs.sourceforge.net/ftp/SUPPORTED.CARDS Last updated in July. You may want to scan that list for supported cards and maybe replace that card. -- Edward M. Croft Sr. Systems Engineer Open Ratings, Inc. 200 West Street Waltham, MA 02451-1121
