Am So, den 17.10.2004 schrieb Ian Clough um 11:37: > I downloaded the tarball from AVM and ran ./install which reported:- > [root@Vigor11 fritz]# ./install > > Welcome to the FRITZ!Card PCI driver installation! > > Generating FRITZ!Card PCI driver for kernel 2.6.8-1.521... > Copying FRITZ!Card PCI driver... > src/fcpci.ko to /lib/modules/2.6.8-1.521/extra/fcpci.ko > > The driver files have been copied. > > Ready Ok, good so far. > [root@Vigor11 fritz]# > > I then changed /etc/sysconf/isdncard to:- > RESOURCES='protocol=2 type=27 id=HiSax' > NAME='AVM PCI (Fritz!PCI)' > MODULE=fcpci > VENDOR_ID=1244 > FIRMWARE= > > I guess that this is not correct - how do I find the correct settings? You have to remove the whole file. Best is to move it to a safe place where you could get it back later, if you need to. > When I reboot my log says:- > Oct 17 09:36:20 vigor11 kernel: CAPI Subsystem Rev 1.1.2.8 > Oct 17 09:36:20 vigor11 kernel: fcpci: module license 'Proprietary' taints > kernel. > Oct 17 09:36:20 vigor11 kernel: fcpci: Unknown parameter `protocol' > Oct 17 09:36:20 vigor11 kernel: fcpci: AVM FRITZ!Card PCI driver, revision > 0.6.2 > Oct 17 09:36:20 vigor11 kernel: fcpci: (fcpci built on Oct 17 2004 at > 09:31:17) > Oct 17 09:36:20 vigor11 kernel: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5 > (level, low) -> IRQ 5 > Oct 17 09:36:20 vigor11 kernel: fcpci: AVM FRITZ!Card PCI found: port > 0x3000, irq 5 > Oct 17 09:36:20 vigor11 kernel: fcpci: Loading... > Oct 17 09:36:20 vigor11 kernel: fcpci: Driver 'fcpci' attached to stack. > (152) > Oct 17 09:36:20 vigor11 kernel: fcpci: Stack version 3.11-02 > Oct 17 09:36:20 vigor11 kernel: kcapi: Controller 1: fcpci-3000-05 attached > Oct 17 09:36:20 vigor11 kernel: kcapi: card 1 "fcpci-3000-05" ready. > Oct 17 09:36:20 vigor11 kernel: fcpci: Loaded. > Oct 17 09:36:20 vigor11 kernel: fcpci: Removing... > Oct 17 09:36:20 vigor11 kernel: kcapi: card 1 down. > Oct 17 09:36:21 vigor11 kernel: kcapi: Controller 1: fcpci-3000-05 > unregistered > Oct 17 09:36:21 vigor11 kernel: fcpci: Removed. > Oct 17 09:36:21 vigor11 kernel: fcpci: Driver 'fcpci' detached > Any ideas I don't know why it unloads again. Be sure no HiSaX module is loaded. > I also cannot find the capiutil module The module might not be necessary. Maybe have a look at the kernel documentation or help page for the module. The code is in the FC2 kernel source, though the module is not build. > Ian If you run capiinit, does it now works? And what about capiinfo? There is http://www.friendglow.net/ with some information about running AVM cards on Fedora as well some packages. Might be helpful reading a bit there. Feel free to ask again. Alexander -- Alexander Dalloz | Enger, Germany | GPG key 1024D/ED695653 1999-07-13 Fedora GNU/Linux Core 2 (Tettnang) kernel 2.6.8-1.521smp Serendipity 16:04:27 up 3 days, 11:15, load average: 0.53, 0.42, 0.24
Attachment:
signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil
