Hello,
I'm having some trouble with FC2's kernel (2.6.8-1.521) losing its ability to talk to an Adaptec 2100S SCSI RAID card after just under a day of uptime. In order to get FC2 installed on this system, I followed these directions:
http://www.redhat.com/archives/fedora-list/2004-May/msg03906.html
Has anyone ever come across the errors below after a similar install?
TIA, Troy
Relevant lines from /var/log/messages:
Oct 6 05:10:22 my-server kernel:
Oct 6 05:10:22 my-server kernel: /dev/i2o/hda error: Failure communicating to device.
Oct 6 05:10:22 my-server kernel: end_request: I/O error, dev i2o/hda, sector 58470496
Oct 6 05:10:25 my-server kernel:
Oct 6 05:10:25 my-server kernel: /dev/i2o/hda error: Failure communicating to device.
Oct 6 05:10:25 my-server kernel: end_request: I/O error, dev i2o/hda, sector 69501480
Oct 6 05:10:25 my-server kernel: Buffer I/O error on device i2o/hda2, logical block 8655555
Oct 6 05:10:25 my-server kernel: lost page write due to I/O error on i2o/hda2
Oct 6 05:10:25 my-server kernel:
Oct 6 05:10:25 my-server kernel: /dev/i2o/hda error: Failure communicating to device.
Oct 6 05:10:25 my-server kernel: end_request: I/O error, dev i2o/hda, sector 69501576
Oct 6 05:10:25 my-server kernel: Buffer I/O error on device i2o/hda2, logical block 8655567
Oct 6 05:10:25 my-server kernel: lost page write due to I/O error on i2o/hda2
Oct 6 05:10:48 my-server kernel:
Oct 6 05:10:48 my-server kernel: /dev/i2o/hda error: Failure communicating to device.
Oct 6 05:10:48 my-server kernel: end_request: I/O error, dev i2o/hda, sector 69501672
Oct 6 05:10:48 my-server kernel: Buffer I/O error on device i2o/hda2, logical block 8655579
Oct 6 05:10:48 my-server kernel: lost page write due to I/O error on i2o/hda2
Oct 6 05:10:48 my-server kernel:
Oct 6 05:10:48 my-server kernel: /dev/i2o/hda error: Failure communicating to device.
Oct 6 05:10:48 my-server kernel: end_request: I/O error, dev i2o/hda, sector 69501776
Oct 6 05:10:48 my-server kernel: Buffer I/O error on device i2o/hda2, logical block 8655592
Oct 6 05:10:48 my-server kernel: lost page write due to I/O error on i2o/hda2
Oct 6 05:10:48 my-server kernel:
Oct 6 05:10:48 my-server kernel: /dev/i2o/hda error: Failure communicating to device.
Oct 6 05:10:48 my-server kernel: end_request: I/O error, dev i2o/hda, sector 69501872
Oct 6 05:10:48 my-server kernel: Buffer I/O error on device i2o/hda2, logical block 8655604
Oct 6 05:10:48 my-server kernel: lost page write due to I/O error on i2o/hda2
Oct 6 05:10:48 my-server kernel:
Oct 6 05:10:48 my-server kernel: /dev/i2o/hda error: Failure communicating to device.
Oct 6 05:10:48 my-server kernel: end_request: I/O error, dev i2o/hda, sector 69501968
Oct 6 05:10:48 my-server kernel: Buffer I/O error on device i2o/hda2, logical block 8655616
Oct 6 05:10:48 my-server kernel: lost page write due to I/O error on i2o/hda2
Oct 6 10:53:47 my-server syslogd 1.4.1: restart.
Contents of /var/log/dmesg:
Linux version 2.6.8-1.521 (bhcompile@xxxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Mon Aug 16 09:01:18 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 VIA694 ) @ 0x000f7a00
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: MADT (v001 VIA694 0x00000000 0x00000000) @ 0x1fff59c0
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
mapped 4G/4G trampoline to ffff3000.
Initializing CPU#0
CPU 0 irqstacks, hard=023c7000 soft=023c6000
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 999.670 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 515028k/524224k available (2012k kernel code, 8404k reserved, 651k data, 140k init, 0k highmem)
Calibrating delay loop... 1970.17 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 275k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 11 (level, low) -> IRQ 11
vesafb: probe of vesafb0 failed with error -6
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1097064791.608:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 9488DB81FF525AA3
- User ID: Red Hat, Inc. (Kernel Module GPG key)
ksign: invalid packet (ctb=00)
Unable to load default keyring: error=74
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU] (supports C1)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:pio, hdd:pio
hda: CDU5211, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 52X CD-ROM drive, 120kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 9362)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4bios S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
SCSI subsystem initialized
I2O Core - (C) Copyright 1999 Red Hat Software
I2O: Event thread created as pid 171
i2o: Checking for PCI I2O controllers...
ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 11 (level, low) -> IRQ 11
i2o: I2O controller on bus 0 at 121.
i2o: PCI I2O controller at D4000000 size=33554432
I2O: MTRR workaround for Intel i960 processor
i2o/iop0: Installed at IRQ11
i2o: 1 I2O controller found and installed.
Activating I2O controllers...
This may take a few minutes if there are many devices
i2o/iop0: LCT has 16 entries.
I2O Block Storage OSM v0.9
(c) Copyright 1999-2001 Red Hat Software.
i2o_block: registered device at major 80
i2o_block: Checking for Boot device...
Claiming as Boot device: Controller 0, TID 517
i2o_block: New device detected
Controller 0 Tid 517
i2ob: Installing tid 517 device at unit 0
i2o/hda: Max segments 0, queue depth 8, byte limit 1024.
i2o/hda: Disk Storage: 35003MB, 512 byte sectors.
i2o/hda: Maximum sectors/read set to 2.
i2o/hda: i2o/hda1 i2o/hda2 i2o/hda3
i2o_block: Checking for I2O Block devices...
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 140k freed
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
NET: Registered protocol family 10
Disabled Privacy Extensions on device 0235c2a0(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ACPI: Power Button (FF) [PWRF]
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 12 (level, low) -> IRQ 12
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 12, io base 0000d800
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 12 (level, low) -> IRQ 12
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: irq 12, io base 0000dc00
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
EXT3 FS on i2o/hda2, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@xxxxxxxxxxxxxx
cdrom: open failed.
Adding 522104k swap on /dev/i2o/hda3. Priority:-1 extents:1
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on i2o/hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
__________________ Troy Davis Interactive Engineer Metaphor Studio 538 Reading Road Loft 200 Cincinnati, Ohio 45202
Tel: 513-723-0290 Fax: 513-723-0670 http://metaphorstudio.com
