I Rodolfo. What you said is really. A new table ... some time ago, I have changed table of my pc and I have plugged cable... sorry, but Windows not lost configurations, I don't know this. thans you too. bye On Wed, 6 Oct 2004 09:38:28 -0400, Rodolfo Alcázar <rodolfo.alcazar@xxxxxxxxxxxx> wrote: > Hi, Im a newbie at all, but maybe this tips would help you. I came from a > wingows environment, too, and've planned staying in linux. > > 1. You mention you tried some interconnections. It sounds stupid, but maybe > when you plugged the cable, you loose the card. Verify card connection to > board. If the card has one, check if led works fine. Check cables. Be sure > card works. > 2. (you didnt mention it), if kudzu does not report the misconfig when > booting, prbabily is some configuration issue. > 3. Check your /etc/modules.conf file. If you are using a Realtek card, maybe > you can try "alias eth0 8139too" or a 8139cp in /etc/modules.conf instead of > 3c501. > 4. Use dmesg command and check logs (in /var/log dir), maybe you can find > some advice. > > Rodolfo > > > > ----- Original Message ----- > From: "fellons" <roberto.felloni@xxxxxxxxx> > > > Hi to all. > > > > For the first, I wanna said thanks to who have reply me. > > I don't answer at once becouse I think is better try the solutions > > replied me, read some article, try to make ecc... and after, if my > > problem never-ending ... then send new mail :) > > > > My network card don't work again :(( > > anaconda (I think is it! who make boot) and "ifup eth0"said "device not > > present" > > > > Some god man can help me, please ? > > > > I attach information result to my job : > > - lspci found > > 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > > RTL-8139/8139C/8139C+ (rev 10) > > > > - in /etc/modprobe.conf > > alias eth0 3c501 > > > > - lsmod not found nothing > > lsmod not found some of eth0, 3c501 or some other with net do than > > specify use of network card > > > > - dirver not found in /lib/modules ... > > > > - this is my ifcfg-eth0 > > DEVICE=eth0 > > BOOTPROTO=none > > IPADDR=192.168.0.1 > > NETMASK=255.255.255.0 > > ONBOOT=yes > > USERCTL=no > > PEERDNS=no > > TYPE=Ethernet > > IPV6INIT=no (this I think is off becouse I have write "alias net-pf-10 > > off" on modprobe.conf - for a problem of SSHD) > > > > I prefer to work with terminal, but I have try to use once > > system-config-network. > > This prog know my card, but card is deactivated. > > If I try to active card, this is the message returned: > > "system-config-network:17917): Gtk-CRITICAL **: file gtktextbuffer.c: line > > 557 > > (gtk_text_buffer_emit_insert): assertion `g_utf8_validate (text, len, > > NULL)' > > failed" > > > > This card work (if is not broken now!) before have worked on direct > > connection onto 2 win2000 and also onto win2000 and redhat 7.3 (this > > last not really sure to work well). > > > > Now I work with apache, write something for web, and apache on > > 127.0.0.1 work well. > > > > My project is a domestic network, and this pc must become a server > > machine (for what services I don't know now (DNS, MAIL, INTERNET ...)) > > > > I come to Windows world, and Linux is to me hard to understand. > > > > NB > > all operation are executed with root. > > > > Sorry for the long mail > > Thank in advantage for any answer > > and sorry for my english. > > > > bye by fellons > > > > -- > > fedora-list mailing list > > fedora-list@xxxxxxxxxx > > To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list > >
