tor, 30.09.2004 kl. 14.30 skrev James Wilkinson: > Tor Harald Thorland was having trouble with a USB disk. > > Suggestion: > > Can you try booting with acpi=off (at the end of the kernel comand line: > > edit it in grub or in /boot/grub/grub.conf)? I know that it's not really > > a proper solution on a laptop, but it might help you find one. > > > > I don't really know enough about the ins and outs of acpi to tell, but > > if acpi=off cures the problem, then acpi=noirq might be worth trying. > > I replied: > > The messages file now contains the following: > > > > Sep 27 20:11:00 dsl-69-134 kernel: ohci_hcd 0000:00:02.0: wakeup > > Sep 27 20:11:00 dsl-69-134 kernel: usb 1-1: new full speed USB device > > using address 2 > > Sep 27 20:11:00 dsl-69-134 kernel: Initializing USB Mass Storage > > driver... > > Sep 27 20:11:00 dsl-69-134 kernel: scsi0 : SCSI emulation for USB Mass > > Storage devices > > Sep 27 20:11:00 dsl-69-134 kernel: Vendor: USB 2.0 Model: Mobile > > Disk N4M Rev: 1.00 > > Sep 27 20:11:00 dsl-69-134 kernel: Type: > > Direct-Access ANSI SCSI revision: 02 > > Sep 27 20:11:00 dsl-69-134 kernel: Attached scsi generic sg0 at scsi0, > > channel 0, id 0, lun 0, type 0 > > Sep 27 20:11:00 dsl-69-134 kernel: usbcore: registered new driver > > usb-storage > > Sep 27 20:11:00 dsl-69-134 kernel: USB Mass Storage support registered. > > Sep 27 20:11:00 dsl-69-134 kernel: SCSI device sda: 999424 512-byte hdwr > > sectors (512 MB) > > Sep 27 20:11:01 dsl-69-134 kernel: sda: Write Protect is off > > Sep 27 20:11:01 dsl-69-134 kernel: sda: assuming drive cache: write > > through > > Sep 27 20:11:01 dsl-69-134 kernel: sda: sda1 > > Sep 27 20:11:01 dsl-69-134 kernel: Attached scsi removable disk sda at > > scsi0, channel 0, id 0, lun 0 > > Sep 27 20:11:01 dsl-69-134 kernel: updfstab: Using deprecated /dev/sg > > mechanism instead of SG_IO on the actual device > > Sep 27 20:11:01 dsl-69-134 scsi.agent[2425]: disk at > > /devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/host0/0:0:0:0 > > Sounds like things are getting further, then. What happens if you try > mounting /dev/sda1 somewhere? Yes, Its getting further... I can now mount /dev/sda1 to /mnt/flash (or wathever) when I have the ACPI=off. I tryed to make the ACPI=noirq. Then the I rebooted, and the computer hang, right after the graphical boot said: setting hostname (or something.. I have norwegian text on it) Also the my usb mouse dident work during this startup (it normaly does work). I then had to edit the kernel parameter from grub to make it boot. I also has a Apacer handy steno 1.1 256mb disk, i was also able to make this work with the ACPI=off. The only thing here is that the Apacer stick is /dev/sda, even if only this stick is in the usb port. Why does 1 of them use /dev/sda, when the other comes in as /dev/sda1 ? I've added both of them to /etc/fstab as: /dev/sda /mnt/flash vfat noauto,user,rw 0 0 /dev/sda1 /mnt/flash2 vfat noauto,user,rw 0 0 Is this the correct way to do it? and if I set it to auto instead of noauto, will it then automaticly mount when I insert it? Also, how can I disable the graphical boot to see wats going on when the hangs during the boot? James was also earlyer talking about maby making a bugzilla entry about this.. Is this problem something to add to bugzilla, and if so.. how? Many thanx for all the good help James!! THT
