On Wed, 2004-09-15 at 10:40, Olwe Melwasul wrote: > I'm hoping I have the right list here with my help question.... > > I have Fedora 2 and I've installed it on my Presario 2100 laptop. I'm > trying to get the video out to my CRT to work but it only will mirror > the laptop screen during non-X video output. The second X comes on, my > NEC MultiSync 97F dies. Below is my xorg.conf file: > > Olwe > ---- > > # Xorg configuration created by system-config-display > > Section "ServerLayout" > Identifier "Multihead layout" > Screen 0 "Screen0" LeftOf "Screen1" > Screen 1 "Screen1" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > Option "Xinerama" "off" > Option "Clone" "on" > EndSection > > Section "Files" > > # RgbPath is the location of the RGB database. Note, this is the name > of the > # file minus the extension (like ".txt" or ".db"). There is normally > # no need to change the default. > # Multiple FontPath entries are allowed (they are concatenated together) > # By default, Red Hat 6.0 and later now use a font server independent of > # the X server to render fonts. > RgbPath "/usr/X11R6/lib/X11/rgb" > FontPath "unix/:7100" > EndSection > > Section "Module" > Load "dbe" > Load "extmod" > Load "fbdevhw" > Load "glx" > Load "record" > Load "freetype" > Load "type1" > Load "dri" > EndSection > > Section "ServerFlags" > Option "AllowMouseOpenFail" "yes" > EndSection > > Section "InputDevice" > > # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) > # Option "Xleds" "1 2 3" > # To disable the XKEYBOARD extension, uncomment XkbDisable. > # Option "XkbDisable" > # To customise the XKB settings to suit your keyboard, modify the > # lines below (which are the defaults). For example, for a non-U.S. > # keyboard, you will probably want to use: > # Option "XkbModel" "pc102" > # If you have a US Microsoft Natural keyboard, you can use: > # Option "XkbModel" "microsoft" > # > # Then to change the language, change the Layout setting. > # For example, a german layout can be obtained with: > # Option "XkbLayout" "de" > # or: > # Option "XkbLayout" "de" > # Option "XkbVariant" "nodeadkeys" > # > # If you'd like to switch the positions of your capslock and > # control keys, use: > # Option "XkbOptions" "ctrl:swapcaps" > # Or if you just want both to be control, use: > # Option "XkbOptions" "ctrl:nocaps" > # > Identifier "Keyboard0" > Driver "keyboard" > Option "XkbModel" "pc105" > Option "XkbLayout" "us" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "IMPS/2" > Option "Device" "/dev/input/mice" > Option "ZAxisMapping" "4 5" > Option "Emulate3Buttons" "no" > EndSection > > Section "Monitor" > Identifier "Monitor0" > VendorName "Monitor Vendor" > ModelName "Compaq 1520 Flat Panel Monitor" > HorizSync 31.0 - 96.0 > VertRefresh 55.0 - 160.0 > Option "dpms" > EndSection > > Section "Monitor" > Identifier "Monitor1" > VendorName "Monitor Vendor" > ModelName "NEC MultiSync 95F" > HorizSync 31.0 - 96.0 > VertRefresh 55.0 - 160.0 > Option "dpms" > EndSection > > Section "Device" > Identifier "Videocard0" > Driver "radeon" > VendorName "Videocard vendor" > BoardName "ATI Radeon Mobility U1" > BusID "PCI:1:5:0" > EndSection > > Section "Device" > Identifier "Videocard1" > Driver "radeon" > VendorName "Videocard Vendor" > BoardName "ATI Radeon Mobility U1" > BusID "PCI:1:5:0" > Screen 1 > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Videocard0" > Monitor "Monitor0" > DefaultDepth 24 > SubSection "Display" > Viewport 0 0 > Depth 24 > Modes "1024x768" "800x600" "640x480" > EndSubSection > EndSection > > Section "Screen" > Identifier "Screen1" > Device "Videocard1" > Monitor "Monitor1" > DefaultDepth 24 > SubSection "Display" > Viewport 0 0 > Depth 24 > Modes "1024x768" "1280x960" "1600x1200" > EndSubSection > EndSection > > Section "DRI" > Group 0 > Mode 0666 > EndSection The laptop only has one video chip, and, I don't believe it will be possible set up duel heads. Most laptop BIOS's and videos are pretty limited for power and size constraints. -- jludwig <wralphie@xxxxxxxxxxx>
