On Tue, 2004-09-14 at 11:16, eric tanguy wrote:
> > Am Di, den 14.09.2004 schrieb eric tanguy um 16:53:
> >
> >> I found these lines in dmesg but i don't know what it is and how to
> >> solve this :
> >>
> >> hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc:
> >> command error: error=0x50
> >> end_request: I/O error, dev hdc, sector 787072
> >> hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc:
> >> command error: error=0x50
> >> end_request: I/O error, dev hdc, sector 0
> >
> >> Eric
> >
> > Either the drive /dev/hdc is dieing or it has a problem with DMA. So
> > check the drive with smartctl and/or with a tool of the manufacturer. If
> > the drive is ok, you'll have to disable DMA for hdc (use hdparm to do
> > so).
> >
> > Alexander
>
> /dev/hdc is my cdwriter with a cd-rw in it. I suppose there is a problem
> with burning ?
> Eric
Eric,
Is the cdrw blank? If so, do you get the same errors with non-blank CD?
Bob...
Attachment:
signature.asc
Description: This is a digitally signed message part
