Re: Running fedora core 2 on Intel 915 chipset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Well, with the help of my computer guru, I found the answer.  To get
fedora core 2 running on a dell gx280 computer, I did the following:

Boot the install in textmode, do the install, and when it prompts for
a reboot at the end, use <ctrl><alt><F2> to change to a new virtual
console.  Edit /etc/inittab, and change the default run level to 3 (to
keep it from starting X, this is not absolutely necessary, but helps).

Reboot.

>From here, there is an optional step.  If you install the latest
2.6.8-521 kernel, the ethernet will work, which is some help.

Install the kernel-2.6.8-521.srpm (rpm -ivh kernel-2.6.8-521.srpm),
edit the config file in /usr/src/redhat/SOURCES to change the AGP-* to
modules.  Make a .gnupg directory in your home directory.  Do a
rpmbuild -ba --target=i686 SPECS/kernel-2.6.spec to build the kernel. 
Finally do an rpm -ivh on the rpm in /usr/src/redhat/RPMS/i686. 
Reboot.

You should now have ethernet, and not have AGP installed on your machine.

Download the Intel drivers from
http://www.intel.com/support/graphics/sb/CS-010512.htm?iid=graphics+915main&;

get the tar version.

expand it out.  comment out lines 104-106 from the file dripkg/drm/drm_vm.h

and in the file dripkg/drm/Makefile.linux change line 51 from gdg.o
and i810.o to gdg.ko and i810.ko.

run the install.sh file.  

Finally, edit your /etc/X11/xorg.conf and change the driver from VESA
to i81-, and you are done.

I don't take all of the credit.  Much of that goes to seth who figured
most of it out.  Anyway, it worked for me.

matthew asplund

On Wed, 01 Sep 2004 11:04:12 -0500, Jason L Tibbitts III
<tibbs@xxxxxxxxxxx> wrote:
> >>>>> "MA" == Matthew Asplund <mattasplund@xxxxxxxxx> writes:
> 
> MA> As far as X11, no luck so far.  Even with the device set for VESA
> MA> (using a Dell 19" LCD with DVI connector) the monitor goes to
> MA> sleep, and I get a warning saying that it cannot lock a region of
> MA> memory.
> 
> You could try installing the latest versions of kernel, xorg-x11,
> hwdata and system-config-display from rawhide.  I recall a notice that
> i915 DRM made it into the newer kernels (i915.ko exists in 2.6.8-1.533
> at least) and I'm pretty sure it's supported in the latest Xorg
> snapshots as well.
> 
>  - J<
>



[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux