The long and the short of it, for me, was as simple as adding this to the
end of my kernel line in my grub.conf file.
hdc=ide-scsi hdd=ide-scsi
That wound up creating the appropriate links between /dev/cdrom and the
appropriate devices.
On Sun, 29 Aug 2004, Kristian André Gallis wrote:
> Hello!
>
> I run Fedora 2 on a Fujitsu Siemens Amilo A7620 laptop, and have
> suddenly got myself into trouble that I cannot find a solution to on the
> web.
>
> I was going to burn my first CD with cdrecord on Fedora 2. But that
> didn't work. I had a problem when I used Fedora 1 aswell, but then I
> just followed a how-to in the Red Hat Linux Fedora bible to configure
> the IDE CD-ROM for recording.
>
> Then I got into trouble, because this how-to is for kernel 2.4 and I
> have 2.6.8. I didn't think of this and just tried to follow it step by
> step. The result was that cdrecord does still not work, and now _I'm not
> able to read CDs anymore!_
>
> The things I have done (run) is:
>
> [root@localhost /]# modprobe -a ide-scsi
> [root@localhost dev]# rm cdrom
> [root@localhost dev]# ln -s scd0 cdrom
>
> How can I revert to the original configuration? So I at least am able to
> read CDs?
>
> Information:
> [root@localhost /]# dmesg | grep ^hd
> hda: FUJITSU MHS2040AT, ATA DISK drive
> hdc: Slimtype COMBO LSC-24081, ATAPI CD/DVD-ROM drive
> hda: max request size: 128KiB
> hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
> hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
> hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
> hdc: packet command error: error=0x54
>
> [root@localhost /]# cdrecord -scanbus
> Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004
> Jörg Schilling
> Note: This version is an unofficial (modified) version with DVD support
> Note: and therefore may have bugs that are not present in the original.
> Note: Please send bug reports or support requests to
> <warly@xxxxxxxxxxxxxxxx>.
> Note: The author of cdrecord should not be bothered with problems in
> this version.
> scsidev: 'ATA'
> devname: 'ATA'
> scsibus: -2 target: -2 lun: -2
> Warning: Using badly designed ATAPI via /dev/hd* interface.
> Linux sg driver version: 3.5.27
> Using libscg version 'schily-0.8'.
> cdrecord: Warning: using inofficial libscg transport code version
> (schily - Red Hat-scsi-linux-sg.c-1.80-RH '@(#)scsi-linux-sg.c 1.80
> 04/03/08 Copyright 1997 J. Schilling').
> scsibus1:
> 1,0,0 100) 'Slimtype' 'COMBO LSC-24081 ' '3MU4' Removable CD-ROM
> 1,1,0 101) *
> 1,2,0 102) *
> 1,3,0 103) *
> 1,4,0 104) *
> 1,5,0 105) *
> 1,6,0 106) *
> 1,7,0 107) *
>
>
> Thanks for any help.
>
> Kristian André
>
>
>
--
Mike Burger
http://www.bubbanfriends.org
Visit the Dog Pound II BBS
telnet://dogpound2.citadel.org or http://dogpound2.citadel.org
To be notified of updates to the web site, visit
http://www.bubbanfriends.org/mailman/listinfo/site-update, or send a
message to:
site-update-request@xxxxxxxxxxxxxxxxx
with a message of:
subscribe
