I had a similar problem with my ISA SB AWE64 board. While I don't doubt that (a variation of) your solution above would work, I found it much easier to config the kernel with built-in sound rather than modules. Works just fine, of course. It's not likely I'm going to change my sound card every few days and re-boot.Christopher K. Johnson wrote:
Peter Hutnick wrote:
I have a Thinkpad 600 with ISA based Crystal sound. It worked fine with RH6 and FC1, but FC2 won't detect it.
Yes. I had the same issue and got the alsa drivers working by manually configuring. You need to get the options just right.
Try this in your /etc/modprobe.conf
options snd-cs4236 isapnp=0 cport=0x538 port=0x530 sb_port=0x220 fm_port=0x388 irq=5 dma1=1 dma2=0
alias snd-card-0 snd-cs4236
install snd-cs4236 /sbin/modprobe pcspkr && /sbin/modprobe --ignore-install snd-cs4236 && /usr/sbin/alsactl restore >/dev/null 2>&1 || :
remove snd-cs4236 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-cs4236
And I forgot to mention you need to modprobe snd-card-0, then go into the mixer and set sound levels so everything is audible instead of turned down to zero.
-- Fritz Whittington It is unwise to be too sure of one's own wisdom. It is healthy to be reminded that the strongest might weaken and the wisest might err. (Mahatma Gandhi)
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
