Just entered this in bugzilla: Description of problem: Did standard 32 bit FC2 install on a dual opteron 246 system based on the Arima HDAMA-SATA (ATO2161) motherboard with 2GB of Memory (4 x 512M DIMMs) with a 40GB IDE boot disk and 2 x 250 GB SATA disks set up as /home and /home1. Standard install runs fine using the onboard ATI RageXL with 8MB Memory graphics port. Once installed and set to come up in run level 5 EVERYTHING WORKS. First: Used yum to update from local mirror of FC2 update directory and then reboot. System does not run X and we get a blue screen with the updates installed that says it can't start the Xserver and that it can't attach to the 0:0 frame buffer. Did a complete reinstall and again the stock release works fine. Only installed/upgraded the kernel using "rpm -ivh kernel-smp-2.6.7- 1.494.2.2.i686.rpm" -- Same problem with X occurs. System booting into run level 3 with no problems but startx causes a blank screen. Version-Release number of selected component (if applicable): kernel-smp-2.6.7-1.494.2.2.i686.rpm How reproducible: Every time Steps to Reproduce: 1. Standard 32 bit smp FC2 install 2. run rpm -ivh kernel-smp-2.6.7-1.494.2.2.i686.rpm 3. reboot and select new kernel 4. System can't connect to onboard ATI RageXL graphics port and X fails to run. Expected results: Expected the updates to install and run fine Additional info: Can test this again once the ATI driver or X is fixed as we will have a similar machine here for another 7 days. xlog shows a standard startup of X and no errors. Any suggestions on a fix would be helpful...... Seth Bardash Integrated Solutions and Systems 1510 North Gate Road Colorado Springs, CO 80921 http://www.integratedsolutions.org Phone: 719-495-5866 Fax: 719-495-5870 Supplier of AMD, Intel and SPARC Servers and Systems running Windows, Linux, Solaris and VxWorks. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.736 / Virus Database: 490 - Release Date: 8/9/2004
