Oie!
Yesternight I installed FC2 on an old P3 196MB with the Server-Setup - I want masqerading networking, squid, dhcpd and sendmail. I added the sendmail, squi and dhcp server from the software selection. I have an internal interface eth0 for my LAN and an external interface eth1 which dhcps the IP address from the cable provider. Basic networking works and up2date ran fine updating the packages. The kernel is up to date.
However: I want to setup dhcp server on eth0 but /etc/dhcpd.conf is missing - or is this by design not there? rpm shows dhcpd is installed.
Second: I cant ssh into the box, not even ssh localhost. It says authentication failed and there is no password query. In /var/log/message I find messages that Port 22 on 0.0.0.0 is already in use and sshd fails to bind there. I installed RH9 and FC1 a few times now but always either "Full" or "Workstation" plus few packages and never had a problem with the out-of-the-box ssh Installation. I changed options in /etc/ssh/sshd_config and ssh_config (removing Protocol 1 support) and such but still cant ssh into the box. I disabled/unloaded iptables and still no success. SSH user@xxxxxxxxxxxxxx works, I can get "away" from the PC but no onto it.
Was choosing "Server" a bad idea and do I have to add some more rpms? Did somebody stumble accross similar problems?
Regards, Philipp Ott
