On Wed, 2004-07-21 at 11:47, Andrea Marin wrote: > Hi Alberto, > > you can configure all your network-interface in > /etc/sysconfig/network-script. > > In this folder probably you will find more file for more > networks-interface that your system have. > For configure the eth0 interface you must edit the file "ifcfg-eth0" and > in this file you can write all your option > > this is an example: > > # Silicon Integrated Systems [SiS]|SiS900 PCI Fast Ethernet > DEVICE=eth0 //This is the name > BOOTPROTO=static //This is the boot protocol static/dhcp > BROADCAST=XXX.XXX.XXX.XXX //IP addr > HWADDR=XX:XX:XX:XX:XX:XX //IP addr > IPADDR=XXX.XXX.XXX.XXX //IP addr > NETMASK=XXX.XXX.XXX.XXX //IP addr > NETWORK=XXX.XXX.XXX.XXX //IP addr > ONBOOT=yes //if is activate on boot or not > TYPE=Ethernet //type of the layer 2 protocol > > > Bye Andrea > On Wed, 2004-07-21 at 12:11, Alberto M R Davila wrote: > > Hi, > > > > The "network device control" is like this: > > > > Status Device Nickname > > Active eth0 eth0 > > > > Looks OK but does * not * work ... how I could configure manually ? > > > > Thanks, Alberto > > > > > > > > Alberto, try the following as root: vim /etc/sysconfig/networking/devices/ifcfg-eth0 John
