David,
You might want to resend the message with the original subject, not the digest issue number. He's not going to find your response like that. There's too much traffic on the list.
Peace, William
David Zakar wrote:
Hi, Michael,
I've also had similar problems with Fedora Core 1 doing this with USB2 (nForce2 board) and a mass storage device - I see from your logs that you're using 2.6 (and presumably FC2), which is interesting, since it hints that the bug is a driver issue still to be resolved. The way I worked around it was to plug the device into a different physical USB interface, which then worked. That's annoying, I agree, and I ended up simply disabling USB2 and moving everything to a (slow) USB1.1 connection.
A few questions for you:
1. What kind of device is generating these errors? Specific model
information would be handy.
2. Are you sure your USB controller is not sharing an interrupt with
anything? Use "lspci -vv | grep Interrupt" to check
3. How many USB devices and hubs do you have connected to your computer?
4. If you've got Windows, does the device function properly there?
Unless I seriously misunderstood (quite possible!) something in the kernel source, the error is generated by usb.c, which is a library (of sorts) called by the other USB drivers. That means there's no really easy thing to point to as the problem, although I suspect the EHCI-HCD drivers are the problem. No idea where, though - a brief glance at a relevant spot doesn't reveal anything terribly obvious (duh).
CC my personal address on any reply email, since I get the list in digest mode, and sometimes miss stuff.
-DMZ
Hello All:
I installed a USB 2.0 controller in my server, it keeps printing this error
usb 1-3: device not accepting address 2, error -110
I have found many people with this problem on the web, but I haven't found any solutions
Any help would be apreciated.
here is lsmod
Module Size Used by edd 13720 0 joydev 14528 0 sg 41632 0 st 44828 0 sd_mod 25088 0 sr_mod 21028 0 scsi_mod 118340 4 sg,st,sd_mod,sr_mod ide_cd 42628 0 cdrom 42652 2 sr_mod,ide_cd nvram 13448 0 usbserial 35952 0 parport_pc 41024 1 lp 15364 0 parport 44232 2 parport_pc,lp sworks_agp 13472 0 agpgart 36140 1 sworks_agp ehci_hcd 33412 0 ohci_hcd 24324 0 ipv6 276348 37 thermal 16648 0 processor 21312 1 thermal fan 8196 0 button 10384 0 battery 12804 0 ac 8964 0 tg3 75396 0 usbcore 116700 5 usbserial,ehci_hcd,ohci_hcd e100 38400 0 mii 9344 1 e100 evdev 13952 0 subfs 12160 2 reiserfs 263504 4 dm_snapshot 21536 0 dm_mod 57472 7 dm_snapshot raid1 19712 2 ext3 121384 2 jbd 75172 1 ext3
Here is lspci
0000:00:00.0 Host bridge: ServerWorks GCNB-LE Host Bridge (rev 32)
0000:00:00.1 Host bridge: ServerWorks GCNB-LE Host Bridge
0000:00:01.0 USB Controller: NEC Corporation USB (rev 43)
0000:00:01.1 USB Controller: NEC Corporation USB (rev 43)
0000:00:01.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
0000:00:06.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:00:07.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 10)
0000:00:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702 Gigabit Ethernet (rev 02)
0000:00:0f.0 Host bridge: ServerWorks CSB6 South Bridge (rev a0)
0000:00:0f.1 IDE interface: ServerWorks CSB6 RAID/IDE Controller (rev a0)
0000:00:0f.2 USB Controller: ServerWorks CSB6 OHCI USB Controller (rev 05)
0000:00:0f.3 ISA bridge: ServerWorks GCLE-2 Host Bridge
Following is a partial dmesg:
usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.5-7.95-smp ohci_hcd usb usb1: SerialNumber: 0000:00:01.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ohci_hcd 0000:00:01.1: OHCI Host Controller ohci_hcd 0000:00:01.1: irq 17, pci mem e1865000 ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 2 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.5-7.95-smp ohci_hcd usb usb2: SerialNumber: 0000:00:01.1 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd 0000:00:0f.2: OHCI Host Controller ohci_hcd 0000:00:0f.2: irq 10, pci mem e1867000 ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 3 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.5-7.95-smp ohci_hcd usb usb3: SerialNumber: 0000:00:0f.2 usb 1-3: new full speed USB device using address 2 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected ehci_hcd 0000:00:01.2: EHCI Host Controller ehci_hcd 0000:00:01.2: irq 16, pci mem e13bcc00 ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:01.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 usb usb4: Product: EHCI Host Controller usb usb4: Manufacturer: Linux 2.6.5-7.95-smp ehci_hcd usb usb4: SerialNumber: 0000:00:01.2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 5 ports detected Linux agpgart interface v0.100 (c) Dave Jones usb 1-3: device not accepting address 2, error -110 usb 4-5: new high speed USB device using address 2 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 usb 4-5: control timeout on ep0out Non-volatile memory driver v1.2 eth0: no IPv6 routers present end_request: I/O error, dev fd0, sector 0 eth1: no IPv6 routers present end_request: I/O error, dev fd0, sector 0 hdc: ATAPI 24X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.20 SCSI subsystem initialized st: Version 20040318, fixed bufsize 32768, s/g segs 256 BIOS EDD facility v0.13 2004-Mar-09, 2 devices found usb 4-5: control timeout on ep0out usb 4-5: device not accepting address 2, error -110 usb 4-5: new high speed USB device using address 3 mtrr: type mismatch for fd000000,800000 old: uncachable new: write-combining mtrr: type mismatch for fd000000,800000 old: uncachable new: write-combining usb 4-5: control timeout on ep0out usb 4-5: control timeout on ep0out usb 4-5: device not accepting address 3, error -110
