Re: kernel update/wireless install

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 13, 2004 at 03:02:10AM -0400, Me wrote:
> Darren~
> yum definitely is not finding the kernel-module-hostap rpm file.
> I ran rpm -ivh on this and got:
> Error: failed dependencies:
> Atrpms-kmdl-helper is needed by ...
> 
> I found a link to this on the Google search site.  Is this part of the meta
> package 'atrpms-56-1.rhfc2.at.i386.rpm" ?  I'm not sure why yum doesn't find
> it, although I also found a link to a package which supposedly contains all
> the yum headers as well (not sure that I need this, since yum seems to find
> everything else its looking for)...  Please advise.

Me, to end your Odyssey (and embark on another =), please do the
following:

o rpm -Uhv http://download.atrpms.net/other/packages/fedora-2-i386/atrpms/atrpms-kickstart-23-1.rhfc2.at.i386.rpm
o apt-get update
o apt-get install kernel-module-ipw2100-`uname -r`
o apt-get install ipw2100

That's all. Now update your system with

o apt-get upgrade
o apt-get dist-upgrade

After the last step you will also be able to use yum with preset
entries for a dozen of repos. Note that you may get a message like
yum.conf saved as yum.conf.rpmnew, which means that your copy has
remained in place and you would need to manually mc/cp the rpmnew file
over to the correct place.

> Regards,
> 
> John 
> 
> From: fedora-list-bounces@xxxxxxxxxx [mailto:fedora-list-bounces@xxxxxxxxxx]
> On Behalf Of Me
> Sent: Tuesday, July 13, 2004 2:40 AM
> To: 'For users of Fedora Core releases'
> Subject: RE: kernel update/wireless install
> 
> Darren~
> Man, if I could read, I'd be dangerous.  I'm glad I went back to that
> install page and looked again.  I originally read .../en/_$basesearch_ (so
> that's what I wrote).  Reality: .../en/_$basearch_ (as in base archive ?)...
> Sorry about that... Newbie panic attack.  It's reading now.
> 
> John Dangler
> GenoFit
> 800-505-4078 (Corporate)
> 386-767-3730 (Direct)
> www.genofit.com
> jdangler@xxxxxxxxxxx
> 
> 
> From: fedora-list-bounces@xxxxxxxxxx [mailto:fedora-list-bounces@xxxxxxxxxx]
> On Behalf Of Darren Grant
> Sent: Tuesday, July 13, 2004 2:33 AM
> To: For users of Fedora Core releases
> Subject: Re: kernel update/wireless install
> 
> I'd have to see your yum.conf...
> 
> Don't remove your other entries... just make sure you add this to bottom 
> of your yum.conf file.
> 
> [at-stable]
> name=ATrpms for Fedora Core $releasever stable
> baseurl=http://apt.physik.fu-berlin.de/fedora/$releasever/en/$basearch/at-st
> able
> 
> I don't care where it is... it's the only place I've found the ipw2100 
> drivers all nicely packaged in RPM's for FC2 and the 2.6.6-1.435.2.3 kernel.
> 
> Besides you can still use the manual way... of surfing the atrpms.net 
> site and then grabbing the 6 files I mentioned before... then just use 
> rpm -ivh /module.rpm/ to install them.
> 
> Me wrote:
> 
> >Darren~
> >I guessed at the first entry in yum.conf (which was wrong).  Thanks for the
> >update.  I entered the line in yum.conf exactly as below (why a German
> >server?) and got the following output from yum:
> >Gathering header...
> >Server: ATrpms for Fedora...
> >Retrygrab() failed for:
> >http://apt.physik.de/fedora/2/en/$basesearch/at-stable/headers/header.info
> >Executing failover method
> >Failover: out of servers to try
> >Error getting file http://<repeat-of-above>
> >[Errno 4] IOerror: HTTP error 404: Not Found
> >
> >Did I type this wrong, or is the server really busy?
> >
> >Thanks for the help.
> >
> >John
> >
> >From: fedora-list-bounces@xxxxxxxxxx
> [mailto:fedora-list-bounces@xxxxxxxxxx]
> >On Behalf Of Darren Grant
> >Sent: Tuesday, July 13, 2004 2:06 AM
> >To: For users of Fedora Core releases
> >Subject: Re: kernel update/wireless install
> >
> >Me wrote:
> >
> >  
> >
> >>Vlad~
> >>
> >>That's okay. We're all learning. Darren's reply was most helpful 
> >>regarding which pieces to put in place, but I think I need to 
> >>configure my yum.conf file to go to the atrpms servers for these 
> >>pieces. Do you have any knowledge of how to get yum to do this?
> >>
> >>Regards
> >>
> >>John
> >>
> >>*From:* fedora-list-bounces@xxxxxxxxxx 
> >>[mailto:fedora-list-bounces@xxxxxxxxxx] *On Behalf Of *Vlad I.
> >>*Sent:* Tuesday, July 13, 2004 1:55 AM
> >>*To:* For users of Fedora Core releases
> >>*Subject:* Re: kernel update/wireless install
> >>
> >>dude, me too.. sorry.
> >>
> >>
> >>    *From:* Me <mailto:jdangler@xxxxxxxxxxxx>
> >>
> >>    *To:* 'For users of Fedora Core releases'
> >>    <mailto:fedora-list@xxxxxxxxxx>
> >>
> >>    *Sent:* Monday, July 12, 2004 9:58 PM
> >>
> >>    *Subject:* RE: kernel update/wireless install
> >>
> >>    Vlad~
> >>
> >>    Thanks for the reply. The exact output from uname -r gives:
> >>    2.6.6-1.435.2.3
> >>
> >>    The output from uname -a gives:
> >>
> >>    Lnux nebo 2.6.6-1.435.2.3 #1 Thu Jul 1 08:25:29 EDT 2004 i686 i686
> >>    i386 GNU/Linux
> >>
> >>    Hence the confusion.
> >>
> >>    I hope you can help. I'm a little confused by the combination of
> >>    i686 and i386.
> >>
> >>    Regards
> >>
> >>    John
> >>
> >>    *From:* fedora-list-bounces@xxxxxxxxxx
> >>    [mailto:fedora-list-bounces@xxxxxxxxxx] *On Behalf Of *Vlad I.
> >>    *Sent:* Tuesday, July 13, 2004 12:09 AM
> >>    *To:* For users of Fedora Core releases
> >>    *Subject:* Re: kernel update/wireless install
> >>
> >>    Hey, John --
> >>
> >>    Type **uname -r** it will tell you which kernel you are actually
> >>    running, both the Linux version and the Redhat release.
> >>    i586 or i686 are kernel versions. if you are running the i386
> >>    kernel, _EVEN IF YOU HAVE AN i686 CPU_, you must use the i386 RPMs.
> >>
> >>    source - http://prism2.unixguru.raleigh.nc.us/
> >>
> >>    cheers!
> >>
> >>    vlad
> >>
> >>
> >>        *From:* Me <mailto:jdangler@xxxxxxxxxxxx>
> >>
> >>        *To:* fedora-list@xxxxxxxxxx <mailto:fedora-list@xxxxxxxxxx>
> >>
> >>        *Sent:* Monday, July 12, 2004 8:30 PM
> >>
> >>        *Subject:* kernel update/wireless install
> >>
> >>        I am trying to install the ipw2100 wireless on my Insprion
> >>        8600 notebook.
> >>
> >>        I originally installed FC2 2.6.5-1.358, and have since then
> >>        upgraded to 2.6.6.1-435.2.3 using up2date. When I run the make
> >>        file (builds external) I get an error saying that ieee802_11.h
> >>        is not found. The file exists under the /usr/src directory for
> >>        the original kernel. My guess is that I need to download the
> >>        source for the kernel I updated to. I have found the packages
> >>        for both kernel-source and the modules, but they are listed as
> >>        i586 and i686 (there are 64-bit as well, but I don't have that
> >>        system type). Can anyone tell me which of these I should get?
> >>        I am somewhat new at this, so any input is appreciated.
> >>
> >>        Regards,
> >>
> >>        John
> >>
> >>
> >>    
> >>
> >  
> >
> >>
> >>
> >>    
> >>
> >  
> >
> >>
> >>    
> >>
> >Go to this link:
> >
> >http://www.atrpms.net/install.html
> >
> >This shows you how to modify your existing yum.conf file to use 
> >atrpms.net as a resource.
> >
> >Basically you need to add this to the bottom of your /etc/yum.conf file:
> >
> >| [at-stable]
> >name=ATrpms for Fedora Core $releasever stable
> >baseurl=http://apt.physik.fu-berlin.de/fedora/$releasever/en/$basearch/at-s
> t
> >able
> >
> >|
> >
> >
> >  
> >
> 
> 

-- 
Axel.Thimm at ATrpms.net

Attachment: pgpTYN5NwXLOC.pgp
Description: PGP signature


[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux