hi i'm using a wacom graphire usb and it works fine here (including pressure sensitivity) with the latest rawhide and vanilla kernel.org kernels. have you updated your x server (xorg-x11) lately? i have to copy the precompiled "wacom_drv.o" from http://prdownloads.sourceforge.net/linuxwacom/linuxwacom-0.6.3.tar.bz2 package to /usr/X11R6/lib/modules/input to make it work after each x11 update. i attach my working xorg.conf for reference. note, that i had to disable the rhgb bootsplash from the grub.conf, because it won't work when you set your mouse to "mouse1" and not to the default "mice" in the xorg.conf. this is needed so that the wacom mouse and the usb mouse have own channels to operate separately. hope this helps. good luck! lars # Xorg configuration Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" InputDevice "Keyboard0" InputDevice "cursor" InputDevice "wacom" InputDevice "eraser" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" Load "record" Load "freetype" Load "type1" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "CoreKeyboard" Option "XkbModel" "pc105" Option "XkbLayout" "de" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "CorePointer" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mouse1" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "no" EndSection Section "InputDevice" Identifier "cursor" Driver "wacom" Option "SendCoreEvents" Option "Device" "/dev/input/event1" Option "Type" "cursor" Option "Mode" "relative" Option "Speed" "3.0" Option "USB" "on" Option "Threshold" "10" EndSection Section "InputDevice" Identifier "wacom" Driver "wacom" Option "SendCoreEvents" Option "Device" "/dev/input/event1" Option "Type" "stylus" Option "Mode" "absolute" Option "USB" "on" Option "Tilt" "on" Option "Threshold" "10" EndSection Section "InputDevice" Identifier "eraser" Driver "wacom" Option "SendCoreEvents" Option "Device" "/dev/input/event1" Option "Type" "eraser" Option "Mode" "absolute" Option "USB" "on" Option "Tilt" "on" Option "Threshold" "10" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Iiyama" ModelName "Vision Master Pro 510" HorizSync 30.0 - 130.0 VertRefresh 50.0 - 160.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "nvidia" VendorName "NVIDIA" BoardName "NVIDIA GeForce4 Ti 4200" Option "NoLogo" "on" Option "RenderAccel" "on" Option "TwinView" Option "TwinViewOrientation" "clone" Option "TVStandard" "PAL-B" Option "TVOutFormat" "COMPOSITE" Option "SecondMonitorHorizSync" "30-50" Option "SecondMonitorVertRefresh" "60" Option "MetaModes" "1600x1200,800x600; 1280x1024,800x600; 1024x768,800x600; 800x600,800x600; 640x480,640x480" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Paul Raines wrote: > > My wacom pen tablet works fine with the original 2.6.5-1.358 kernel > in FC2. However, upgrading to any of the new 2.6.6 kernel updates > breaks it. The buttons still work but the mouse cursor is instantly > moved to the top right corner on any movement. One can get it to > move inward a few millimeters before it jumps right back to the corner. > > I suppose this has to do with the supposed fixes to the usb or > input drivers. Has anyone gotten a wacom to work in a 2.6.6 kernel? >
