Rob, When I look at the hardware in hardware browser, it sees the device exactly, and the tg3 driver and dev/eth0 All that is fine, any other suggestions? regards norman On Tuesday 06 July 2004 11:00 am, Rob Cartier wrote: > I could be mistaken but you need to build a driver for that > device. I had one of those in my HP xw4100 workstation > and had to build one for it. > > > I think it uses a tg3 driver and can be configured from the netconfig > options. Did kudzu locate the device but couldnt find the driver > > hope that helps. > > > Rob Cartier > > > Message: 19 > Date: Tue, 06 Jul 2004 10:19:08 -0400 > From: Norman LeCouvie <lecouvie@xxxxxxx> > Subject: Internal Broadcom ethernet device > To: fedora-list@xxxxxxxxxx > Message-ID: <40EAB4DC.2020209@xxxxxxx> > Content-Type: text/plain; charset=us-ascii; format=flowed > > I cannot get my internal ethernet device to work, The wireless works > fine and I have even disabled it to allow the cable ethernet to work but > nothing, any ideas? > > norman -- Norman LeCouvie Executive Director - Government Sector International Americas Sun Microsystems Inc.
