On Wed, 2004-06-30 at 12:41, Bob Chiodini wrote: > On Wed, 2004-06-30 at 11:36, Art Werschulz wrote: > > Hi. > > > > We are in the process of moving from RedHat 9 to Fedora Core 2. > > > > When doing "Xorg -confirm", we get the following stanza: > > > > Section "Monitor" > > #DisplaySize 320 240 # mm > > Identifier "Monitor0" > > VendorName "DEL" > > ModelName "DELL P793" > > HorizSync 1129329536.0 - 0.0 > > HorizSync 30.0 - 96.0 > > VertRefresh 842024000.0 - 0.0 > > Option "DPMS" > > EndSection > > > > (Yes, we are using a DELL P793 monitor.) > > ---- snip ---- > > > > So, does anybody have the proper values for the vertical refresh rate? > > Should this be reported as a bug, and (if so), to whom? > > > > Your rates look correct. Maybe it's a problem with the graphics card. > I have a nvidia card that does something similar when my monitor is > connected to the Digital output, but the analog output works fine. > > Try commenting out the HorizSync and VertRefresh lines and let X figure > it out. > > Does your on-screen setup tell you what the actual rates are? Some > monitors will let you see this when you enter configuration mode. This information is readily available on the web: http://support.ap.dell.com/docs/monitors/p793/En/specs.htm Resolution Horizontal scan range 30 kHz to 96 kHz (automatic) Vertical scan range 50 Hz to 160 Hz (automatic) Optimal preset resolution 1024 x 768 at 85 Hz Highest preset resolution 1600 x 1200 at 75 Hz -- C. Linus Hicks <lhicks@xxxxxxxxx>
