Re: Logitech Quickcam Express (USB) Problem...Contd

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Murali Parth wrote:

--- "Brandon W. Saxe" <brandon20va@xxxxxxxxx> wrote:


Your webcam probably isn't at the default
/dev/video0.


It isn't there

Try $v4l-info /dev/video0
to see what's at /dev/video0


It shows driver: bttv, card:BT878Video (LeadtekWinfast 20), bus_info: PCI:0000:00:06.0


$v4l-info /dev/video1
to see what's at /dev/video1


 "open /dev/video1 :No such device "



You can keep querying /dev/video devices until you
get the right one for your quickcam.


I queried v4l-info /dev/video*, but the qiockcam is
NOT there.


Make sure that the usb device was found as well.
usbtree can be used, I think. You can also browse


/proc/bus/usb to see if it's there. dmesg is your
friend as well as /var/log/messages.
I browsed /proc/bus/usb and found "Total 0" there.
Further I queried : " $ cat /var/log/messages |grep video & the result
is:
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/core/usb.c: registered new driver
quickcam spca50x: no version for "struct_module" found: kernel
tainted.
spca50x: no version magic, tainting kernel.
drivers/usb/core/usb.c: registered new driver spca50x
/opt/spca532-25052004/drivers/usb/spca50x.c: spca5xx
driver 0.50 registered. "




once you found your webcam's /dev/video? location,
you can probably override the v4l device that's used


by gnomemeeting or GIMP.
I did : $ v4l-conf /dev/video1 & got :
v4l-conf: using X11 display :0.0
dga: version 2.0
mode: 800x600, depth=24, bpp=32, bpl=3200, base=0xd7000000
/dev/video0 [v4l2]: configuration done .


For example, using xawtv, I have to do
$xawtv -c /dev/video1


I tried this and only TV display was there.
Then # lsmod showed these modules :
Module Size Used by
spca50x 140832 0
quickcam 60596 0
usbcore 108468 2 spca50x,quickcam
tuner 17428 0
bttv 148972 0
video_buf 22020 1 bttv
i2c_algo_bit 9224 1 bttv
v4l2_common 6656 1 bttv
btcx_risc 5128 1 bttv
i2c_core 22020 3
tuner,bttv,i2c_algo_bit
videodev 9728 3 spca50x,quickcam,bttv
I am confused with these messages.Any clues with these inputs, please.
Murali








		
__________________________________
Do you Yahoo!?
Yahoo! Mail - Helps protect you from nasty viruses.
http://promotions.yahoo.com/new_mail




Did you use the drivers from http://qce-ga.sourceforge.net/ I have never had any trouble with those. I apologize I missed your original post.

Austin



[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux