Hi, I have built driver modules for GigaRaid based MB (ITE8212F chipset) and installed them with the 2.6.6-1.435 kernel using code from http://www.ite.com.tw/pc/LinuxDriver_it8212_092005-09.zip . This bit works and I can boot off the RAID1 disks. The process was a little convoluted (http://www.astarte.net.au/dp/fc2iteraidblog.txt) so I would like to build driver disks for a clean install of FC2. I built iteraid.ko for 2.6.5-1.358 and updated the driver disk from RH9 as follows: mkdir modules mv modules.cgz modules zcat modules.cgz | cpio -id mkdir 2.6.5-1.358 and 2.6.5-1.358BOOT cp iteraid.ko into each ls -1 2.6.5-1.358*/*.ko | cpio -Hcrc -o | gzip -9 > ../modules.cgz cd .. rm -fR modules and copy the files to dos floppy. When I boot FC2 CD with acpi=off dd, I get prompted for the disk but everything hangs after reading the disk. Is the procedure for .ko modules the same in FC2? Can anyone help get this going? Cheers, Dave
