I'm having trouble getting a D-Link DWL 650 working on an ancient IBM i1720. I've got Fedora 1, with the stock 2.4.22 kernel, and I get a couple of errors when cardmgr starts (or is restarted). The machine's got a TI cardbus bridge and an Intel PCI bridge.
I'm not sure this card can work on the setup. I found a web page that says it should, with the orinoco driver. The details are below. I tried out a friend's Dell cardbus and it was recognized just fine.
Many thanks for any help.
Here's the entry in /etc/pcmcia/config, which I had to write in
card "D-Link DWL-650 Wireless PC Card RevP ISL370101P-10 A3"
manfid 0x000b, 0x7110
bind "orinoco_cs"
---
And from /var/log/messages:
product info: "D-Link", "DWL-650 Wireless PC Card RevP", "ISL370101P-10" "A3"
---
And the result:
cardmgr[2328]: starting, version is 3.1.31
watching 2 sockets
Card Services release does not match
kernel: cs: IO port probe 0x0c00-ox0cff: clean.
IO port probe 0x0100-0x94ff: excluding 0x120-0x127 0x220-0x22f 0x300-0x307 0x388-0x38f 0x4d0-0x4d7
IO port probe 0x0a00-ox0aff: clean.
cardmgr[2328]: socket 1: D-Link DWL-650 Wireless PC Card RevP ISL370101P-10 A3
executing: 'modprobe hermes'
executing: 'modprobe orinoco'
executing: 'modprobe orinoco_cs'
kernel: eth0:failed to initialize firmware (err = -16)
Freeing alive device c2aa1800, eth0
orinoco_cs: register_netdev() failed
cardmgr[2328]: get dev info on socket 1 failed: Resource temporarily unavailable
--
_______________________________________________
Graffiti.net free e-mail @ www.graffiti.net
Check out our value-added Premium features, such as an extra 20MB for just US$9.95 per year!
Powered by Outblaze
