Thanks! What I hope is pertinent information is included below.
Andrew Robinson
grub.conf:
title Fedora Core (2.4.22-1.2174.nptl-awr1)
root (hd0,9)
kernel /boot/vmlinuz-2.4.22-1.2174.nptl-awr1 ro root=LABEL=/12 hdc=ide-scsi hdd=ide-scsi max_scsi_luns=8 rhgb quiet
initrd /boot/initrd-2.4.22-1.2174.nptl-awr1.img
modules.conf:
add options scsi_mod max_scsi_luns=8
/var/log/messages:
kernel: hub.c: new USB device 00:02.2-2.4, assigned address 9
kernel: usb.c: USB device 9 (vend/prod 0x50d/0x248) is not claimed by any active driver.
kernel: Initializing USB Mass Storage driver...
kernel: usb.c: registered new driver usb-storage
kernel: scsi3 : SCSI emulation for USB Mass Storage devices
kernel: Vendor: BELKIN Model: USB 2 HS-CF Rev: 1.63
kernel: Type: Direct-Access ANSI SCSI revision: 02
kernel: Attached scsi removable disk sda at scsi3, channel 0, id 0, lun 0
kernel: sda: Unit Not Ready, sense:
kernel: Current 00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sda : READ CAPACITY failed.
kernel: sda : status = 1, message = 00, host = 0, driver = 08
kernel: Current sd00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
kernel: sda: I/O error: dev 08:00, sector 0
kernel: I/O error: dev 08:00, sector 0
kernel: unable to read partition table
kernel: USB Mass Storage support registered.
kernel: sda: Unit Not Ready, sense:
kernel: Current 00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sda : READ CAPACITY failed.
kernel: sda : status = 1, message = 00, host = 0, driver = 08
kernel: Current sd00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
kernel: sda: test WP failed, assume Write Enabled
kernel: sda: I/O error: dev 08:00, sector 0
kernel: I/O error: dev 08:00, sector 0
kernel: unable to read partition table
kernel: Device not ready. Make sure there is a disc in the drive.
kernel: Device not ready. Make sure there is a disc in the drive.
updfstab.wrapper[6536]: No changes to be made
kernel: sda: Unit Not Ready, sense:
kernel: Current 00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sda : READ CAPACITY failed.
kernel: sda : status = 1, message = 00, host = 0, driver = 08
kernel: Current sd00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
kernel: sda: test WP failed, assume Write Enabled
kernel: sda: I/O error: dev 08:00, sector 0
kernel: I/O error: dev 08:00, sector 0
kernel: unable to read partition table
kernel: Device not ready. Make sure there is a disc in the drive.
kernel: Device not ready. Make sure there is a disc in the drive.
kernel: sda: Unit Not Ready, sense:
kernel: Current 00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sda : READ CAPACITY failed.
kernel: sda : status = 1, message = 00, host = 0, driver = 08
kernel: Current sd00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
kernel: sda: test WP failed, assume Write Enabled
kernel: sda: I/O error: dev 08:00, sector 0
kernel: I/O error: dev 08:00, sector 0
kernel: unable to read partition table
kernel: Device not ready. Make sure there is a disc in the drive.
kernel: Device not ready. Make sure there is a disc in the drive.
devlabel: devlabel service started/restarted
