I recently upgraded my system to FC2 from RH9 (I actually reinstalled
everything from scratch) and I am having trouble making my scsi cd
writer to work. I am using xcdroast. when I try to add /dev/scd0 to the "add device manually" option, after a while, the system hang.
I repeated the process many time and I managed to get the content of dmesg before the system got completely locked up. Since I thought that
my symbios scsi adapter was a bit old (sym 53c875), I switched it with
an adaptec (aha2940uw) and end up with the same results but this time
the adaptec adapter wa a bit more verbose.
I know that the cd writer works fine because it worked prefectly on RH9.
I even put it on another system on which I had White Box Linux 3.0
installed and it do work perfectly.
What can I do to make my cd writer work?
here is what I get from the symbios logic controller:
sym0:4:0:phase change 2-1 10@3f772360 resid=8.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:8:0: ABORT operation started.
sym0:8:0: ABORT operation timed-out.
sym0:4:0: ABORT operation started.
sym0:4:0: ABORT operation timed-out.
sym0:8:0: ABORT operation started.
sym0:8:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: DEVICE RESET operation started.
sym0:1:0: DEVICE RESET operation timed-out.
sym0:4:0: DEVICE RESET operation started.
sym0:4:0: DEVICE RESET operation timed-out.
sym0:8:0: DEVICE RESET operation started.
sym0:8:0: DEVICE RESET operation timed-out.
sym0:1:0: BUS RESET operation started.
sym0: SCSI BUS reset detected.
sym0: SCSI BUS has been reset.
sym0:1:0: BUS RESET operation complete.
sym0:4:0:phase change 2-1 10@20724360 resid=8.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
here is what I get from the adaptec controller:
settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: DVD-ROM DDU1621, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: WDC WD1200JB-00EVA0, ATA DISK drive
hdd: WDC WD1200JB-00DUA3, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 1024KiB
hdc: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hdc: hdc1
hdd: max request size: 1024KiB
hdd: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hdd: hdd1
hda: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 515k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
SCSI subsystem initialized
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2940 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
(scsi0:A:1): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
Vendor: IBM Model: DDYS-T18350N Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:1:0: Tagged Queuing enabled. Depth 4
SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
(scsi0:A:4): 20.000MB/s transfers (20.000MHz, offset 15)
Vendor: PLEXTOR Model: CD-R PX-W4012S Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:A:8): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
Vendor: SEAGATE Model: ST336607LW Rev: 0004
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:8:0: Tagged Queuing enabled. Depth 4
SCSI device sdb: 71687372 512-byte hdwr sectors (36704 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1
Attached scsi disk sdb at scsi0, channel 0, id 8, lun 0
sym0: <875> rev 0x3 at pci 0000:02:05.0 irq 11
sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: SCSI BUS has been reset.
scsi1 : sym-2.1.18j
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem sda8
Starting XFS recovery on filesystem: sda8 (dev: sda8)
Ending XFS recovery on filesystem: sda8 (dev: sda8)
Freeing unused kernel memory: 144k freed
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
ACPI: Power Button (FF) [PWRF]
ehci_hcd 0000:02:07.2: EHCI Host Controller
ehci_hcd 0000:02:07.2: irq 10, pci mem 4284f000
ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:02:07.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Dec-29
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:1f.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: irq 10, io base 0000b000
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1f.4: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: irq 11, io base 0000b800
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:02:07.0: UHCI Host Controller
uhci_hcd 0000:02:07.0: irq 11, io base 0000a400
uhci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:02:07.1: UHCI Host Controller
uhci_hcd 0000:02:07.1: irq 11, io base 0000a800
uhci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@xxxxxxxxxxxxxx
Adding 2097128k swap on /dev/sda5. Priority:-1 extents:1
XFS mounting filesystem sda1
Ending clean XFS mount for filesystem: sda1
XFS mounting filesystem sdb1
Starting XFS recovery on filesystem: sdb1 (dev: sdb1)
Ending XFS recovery on filesystem: sdb1 (dev: sdb1)
XFS mounting filesystem hdc1
Starting XFS recovery on filesystem: hdc1 (dev: hdc1)
Ending XFS recovery on filesystem: hdc1 (dev: hdc1)
XFS mounting filesystem hdd1
Ending clean XFS mount for filesystem: hdd1
XFS mounting filesystem sda6
Ending clean XFS mount for filesystem: sda6
XFS mounting filesystem sda7
Starting XFS recovery on filesystem: sda7 (dev: sda7)
Ending XFS recovery on filesystem: sda7 (dev: sda7)
XFS mounting filesystem sda9
Starting XFS recovery on filesystem: sda9 (dev: sda9)
Ending XFS recovery on filesystem: sda9 (dev: sda9)
XFS mounting filesystem sda2
Ending clean XFS mount for filesystem: sda2
XFS mounting filesystem sda3
Starting XFS recovery on filesystem: sda3 (dev: sda3)
Ending XFS recovery on filesystem: sda3 (dev: sda3)
NET: Registered protocol family 10
Disabled Privacy Extensions on device 022db720(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
IA-32 Microcode Update Driver: v1.13 <tigran@xxxxxxxxxxx>
microcode: No suitable data for cpu 0
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: Printer, HEWLETT-PACKARD DESKJET 970C
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0
inserting floppy driver for 2.6.5-1.358
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:02.0: 3Com PCI 3c905B Cyclone 100baseTx at 0x9400. Vers LK1.1.19
divert: allocating divert_blk for eth0
divert: freeing divert_blk for eth0
ip_tables: (C) 2000-2002 Netfilter core team
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:02.0: 3Com PCI 3c905B Cyclone 100baseTx at 0x9400. Vers LK1.1.19
divert: allocating divert_blk for eth0
ip_tables: (C) 2000-2002 Netfilter core team
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: Printer, HEWLETT-PACKARD DESKJET 970C
lp0: using parport0 (polling).
lp0: console ready
eth0: no IPv6 routers present
(scsi0:A:4:0): No or incomplete CDB sent to device.
scsi0: Issued Channel A Bus Reset. 1 SCBs aborted
(scsi0:A:4:0): No or incomplete CDB sent to device.
(scsi0:A:4:0): Protocol violation in Message-in phase. Attempting to abort.
scsi0:0:1:0: Attempting to queue an ABORT message
CDB: 0x2a 0x0 0x0 0x5b 0x53 0x78 0x0 0x0 0x8 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State in Message-in phase, at SEQADDR 0x16f
Card was paused
ACCUM = 0x0, SINDEX = 0x21, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x6
SCSISIGI[0x14] ERROR[0x0] SCSIBUSL[0xf] LASTPHASE[0xe0]
SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0xf] SEQCTL[0x10]
SEQ_FLAGS[0x40] SSTAT0[0x0] SSTAT1[0x2] SSTAT2[0xd]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0xa8]
DFCNTRL[0x4] DFSTATUS[0x6d]
STACK: 0x37 0x60 0x0 0x199
SCB count = 12
Kernel NEXTQSCB = 10
Card NEXTQSCB = 0
QINFIFO entries: 0 4 7 2 5 1 11 6
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 3 0 1 5 4 7 2 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
2 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
3 SCB_CONTROL[0xe8] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xff]
4 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
5 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
6 SCB_CONTROL[0xc8] SCB_SCSIID[0x47] SCB_LUN[0x0] SCB_TAG[0x3]
7 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
6 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
11 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
1 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
5 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
2 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
7 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
4 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
0 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
3 SCB_CONTROL[0x48] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 9 8
Untagged Q(4): 3
DevQ(0:1:0): 0 waiting
DevQ(0:4:0): 1 waiting
DevQ(0:8:0): 0 waiting
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:1:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
scsi0:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State in Message-in phase, at SEQADDR 0x16f
Card was paused
ACCUM = 0x0, SINDEX = 0x21, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x6
SCSISIGI[0x14] ERROR[0x0] SCSIBUSL[0xf] LASTPHASE[0xe0]
SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0xf] SEQCTL[0x10]
SEQ_FLAGS[0x40] SSTAT0[0x0] SSTAT1[0x2] SSTAT2[0xd]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0xa8]
DFCNTRL[0x4] DFSTATUS[0x6d]
STACK: 0x37 0x60 0x0 0x199
SCB count = 12
Kernel NEXTQSCB = 0
Card NEXTQSCB = 10
QINFIFO entries: 10 7 2 5 1 11 6 4
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 3 0 1 5 4 7 2 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
2 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
3 SCB_CONTROL[0xe8] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xff]
4 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
5 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
6 SCB_CONTROL[0xc8] SCB_SCSIID[0x47] SCB_LUN[0x0] SCB_TAG[0x3]
7 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
4 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
6 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
11 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
1 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
5 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
2 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
7 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
10 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
3 SCB_CONTROL[0x48] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 9 8
Untagged Q(4): 3
DevQ(0:1:0): 0 waiting
DevQ(0:4:0): 1 waiting
DevQ(0:8:0): 0 waiting
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:1:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
scsi0:0:1:0: Attempting to queue an ABORT message
CDB: 0x2a 0x0 0x0 0x63 0x51 0xcb 0x0 0x0 0x2 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State in Message-in phase, at SEQADDR 0x16f
Card was paused
ACCUM = 0x0, SINDEX = 0x21, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x6
SCSISIGI[0x14] ERROR[0x0] SCSIBUSL[0xf] LASTPHASE[0xe0]
SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0xf] SEQCTL[0x10]
SEQ_FLAGS[0x40] SSTAT0[0x0] SSTAT1[0x2] SSTAT2[0xd]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0xa8]
DFCNTRL[0x4] DFSTATUS[0x6d]
STACK: 0x37 0x60 0x0 0x199
SCB count = 12
Kernel NEXTQSCB = 10
Card NEXTQSCB = 0
QINFIFO entries: 0 7 2 5 1 11 6
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 3 0 1 5 4 7 2 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
2 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
3 SCB_CONTROL[0xe8] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xff]
4 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
5 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
6 SCB_CONTROL[0xc8] SCB_SCSIID[0x47] SCB_LUN[0x0] SCB_TAG[0x3]
7 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
6 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
11 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
1 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
5 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
2 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
7 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
0 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
3 SCB_CONTROL[0x48] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 4 9 8
Untagged Q(4): 3
DevQ(0:1:0): 0 waiting
DevQ(0:4:0): 1 waiting
DevQ(0:8:0): 0 waiting
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:1:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
_root@zebryon:~\[root@zebryon root]#
_root@zebryon:~\[root@zebryon root]#
_root@zebryon:~\[root@zebryon root]#
_root@zebryon:~\[root@zebryon root]#
_root@zebryon:~\[root@zebryon root]#
_root@zebryon:~\[root@zebryon root]#
_root@zebryon:~\[root@zebryon root]#
_root@zebryon:~\[root@zebryon root]# dmesg
sda7)
Ending XFS recovery on filesystem: sda7 (dev: sda7)
XFS mounting filesystem sda9
Starting XFS recovery on filesystem: sda9 (dev: sda9)
Ending XFS recovery on filesystem: sda9 (dev: sda9)
XFS mounting filesystem sda2
Ending clean XFS mount for filesystem: sda2
XFS mounting filesystem sda3
Starting XFS recovery on filesystem: sda3 (dev: sda3)
Ending XFS recovery on filesystem: sda3 (dev: sda3)
NET: Registered protocol family 10
Disabled Privacy Extensions on device 022db720(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
IA-32 Microcode Update Driver: v1.13 <tigran@xxxxxxxxxxx>
microcode: No suitable data for cpu 0
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: Printer, HEWLETT-PACKARD DESKJET 970C
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0
inserting floppy driver for 2.6.5-1.358
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:02.0: 3Com PCI 3c905B Cyclone 100baseTx at 0x9400. Vers LK1.1.19
divert: allocating divert_blk for eth0
divert: freeing divert_blk for eth0
ip_tables: (C) 2000-2002 Netfilter core team
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:02.0: 3Com PCI 3c905B Cyclone 100baseTx at 0x9400. Vers LK1.1.19
divert: allocating divert_blk for eth0
ip_tables: (C) 2000-2002 Netfilter core team
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: Printer, HEWLETT-PACKARD DESKJET 970C
lp0: using parport0 (polling).
lp0: console ready
eth0: no IPv6 routers present
(scsi0:A:4:0): No or incomplete CDB sent to device.
scsi0: Issued Channel A Bus Reset. 1 SCBs aborted
(scsi0:A:4:0): No or incomplete CDB sent to device.
(scsi0:A:4:0): Protocol violation in Message-in phase. Attempting to abort.
scsi0:0:1:0: Attempting to queue an ABORT message
CDB: 0x2a 0x0 0x0 0x5b 0x53 0x78 0x0 0x0 0x8 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State in Message-in phase, at SEQADDR 0x16f
Card was paused
ACCUM = 0x0, SINDEX = 0x21, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x6
SCSISIGI[0x14] ERROR[0x0] SCSIBUSL[0xf] LASTPHASE[0xe0]
SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0xf] SEQCTL[0x10]
SEQ_FLAGS[0x40] SSTAT0[0x0] SSTAT1[0x2] SSTAT2[0xd]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0xa8]
DFCNTRL[0x4] DFSTATUS[0x6d]
STACK: 0x37 0x60 0x0 0x199
SCB count = 12
Kernel NEXTQSCB = 10
Card NEXTQSCB = 0
QINFIFO entries: 0 4 7 2 5 1 11 6
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 3 0 1 5 4 7 2 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
2 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
3 SCB_CONTROL[0xe8] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xff]
4 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
5 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
6 SCB_CONTROL[0xc8] SCB_SCSIID[0x47] SCB_LUN[0x0] SCB_TAG[0x3]
7 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
6 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
11 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
1 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
5 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
2 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
7 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
4 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
0 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
3 SCB_CONTROL[0x48] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 9 8
Untagged Q(4): 3
DevQ(0:1:0): 0 waiting
DevQ(0:4:0): 1 waiting
DevQ(0:8:0): 0 waiting
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:1:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
scsi0:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State in Message-in phase, at SEQADDR 0x16f
Card was paused
ACCUM = 0x0, SINDEX = 0x21, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x6
SCSISIGI[0x14] ERROR[0x0] SCSIBUSL[0xf] LASTPHASE[0xe0]
SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0xf] SEQCTL[0x10]
SEQ_FLAGS[0x40] SSTAT0[0x0] SSTAT1[0x2] SSTAT2[0xd]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0xa8]
DFCNTRL[0x4] DFSTATUS[0x6d]
STACK: 0x37 0x60 0x0 0x199
SCB count = 12
Kernel NEXTQSCB = 0
Card NEXTQSCB = 10
QINFIFO entries: 10 7 2 5 1 11 6 4
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 3 0 1 5 4 7 2 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
2 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
3 SCB_CONTROL[0xe8] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xff]
4 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
5 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
6 SCB_CONTROL[0xc8] SCB_SCSIID[0x47] SCB_LUN[0x0] SCB_TAG[0x3]
7 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
4 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
6 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
11 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
1 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
5 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
2 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
7 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
10 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
3 SCB_CONTROL[0x48] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 9 8
Untagged Q(4): 3
DevQ(0:1:0): 0 waiting
DevQ(0:4:0): 1 waiting
DevQ(0:8:0): 0 waiting
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:1:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
scsi0:0:1:0: Attempting to queue an ABORT message
CDB: 0x2a 0x0 0x0 0x63 0x51 0xcb 0x0 0x0 0x2 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State in Message-in phase, at SEQADDR 0x16f
Card was paused
ACCUM = 0x0, SINDEX = 0x21, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x6
SCSISIGI[0x14] ERROR[0x0] SCSIBUSL[0xf] LASTPHASE[0xe0]
SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0xf] SEQCTL[0x10]
SEQ_FLAGS[0x40] SSTAT0[0x0] SSTAT1[0x2] SSTAT2[0xd]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0xa8]
DFCNTRL[0x4] DFSTATUS[0x6d]
STACK: 0x37 0x60 0x0 0x199
SCB count = 12
Kernel NEXTQSCB = 10
Card NEXTQSCB = 0
QINFIFO entries: 0 7 2 5 1 11 6
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 3 0 1 5 4 7 2 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
2 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
3 SCB_CONTROL[0xe8] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xff]
4 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
5 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
6 SCB_CONTROL[0xc8] SCB_SCSIID[0x47] SCB_LUN[0x0] SCB_TAG[0x3]
7 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
6 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
11 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
1 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
5 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
2 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
7 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
0 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
3 SCB_CONTROL[0x48] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 4 9 8
Untagged Q(4): 3
DevQ(0:1:0): 0 waiting
DevQ(0:4:0): 1 waiting
DevQ(0:8:0): 0 waiting
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:1:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
scsi0:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State in Message-in phase, at SEQADDR 0x16f
Card was paused
ACCUM = 0x0, SINDEX = 0x21, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x6
SCSISIGI[0x14] ERROR[0x0] SCSIBUSL[0xf] LASTPHASE[0xe0]
SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0xf] SEQCTL[0x10]
SEQ_FLAGS[0x40] SSTAT0[0x0] SSTAT1[0x2] SSTAT2[0xd]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0xa8]
DFCNTRL[0x4] DFSTATUS[0x6d]
STACK: 0x37 0x60 0x0 0x199
SCB count = 12
Kernel NEXTQSCB = 0
Card NEXTQSCB = 10
QINFIFO entries: 10 2 5 1 11 6 7
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 3 0 1 5 4 7 2 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
2 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
3 SCB_CONTROL[0xe8] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xff]
4 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
5 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
6 SCB_CONTROL[0xc8] SCB_SCSIID[0x47] SCB_LUN[0x0] SCB_TAG[0x3]
7 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
7 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
6 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
11 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
1 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
5 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
2 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
10 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
3 SCB_CONTROL[0x48] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 4 9 8
Untagged Q(4): 3
DevQ(0:1:0): 0 waiting
DevQ(0:4:0): 1 waiting
DevQ(0:8:0): 0 waiting
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:1:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
scsi0:0:4:0: Attempting to queue an ABORT message
CDB: 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
scsi0:0:4:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi0:0:4:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi0:0:4:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi0:0:8:0: Attempting to queue an ABORT message
CDB: 0x2a 0x0 0x1 0xa0 0x0 0x38 0x0 0x0 0x8 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State in Message-in phase, at SEQADDR 0x16f
Card was paused
ACCUM = 0x0, SINDEX = 0x21, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x6
SCSISIGI[0x14] ERROR[0x0] SCSIBUSL[0xf] LASTPHASE[0xe0]
SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0xf] SEQCTL[0x10]
SEQ_FLAGS[0x40] SSTAT0[0x0] SSTAT1[0x2] SSTAT2[0xd]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0xa8]
DFCNTRL[0x4] DFSTATUS[0x6d]
STACK: 0x37 0x60 0x0 0x199
SCB count = 12
Kernel NEXTQSCB = 10
Card NEXTQSCB = 0
QINFIFO entries: 0 2 5 1 11 6
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 3 0 1 5 4 7 2 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
2 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
3 SCB_CONTROL[0xe8] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xff]
4 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
5 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
6 SCB_CONTROL[0xc8] SCB_SCSIID[0x47] SCB_LUN[0x0] SCB_TAG[0x3]
7 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
6 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
11 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
1 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
5 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
2 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
0 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
3 SCB_CONTROL[0x48] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 7 4 9 8
Untagged Q(4): 3
DevQ(0:1:0): 0 waiting
DevQ(0:4:0): 0 waiting
DevQ(0:8:0): 0 waiting
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:8:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
--
Louis-Marius Pineau | Email: Louis-Marius_Pineau@xxxxxxxxxxxxxxxx
Télé-Université | Tel: (418) 657-2747 ext. 5295
455 rue de l'Église, CP 4800 | Fax: (418) 657-2094
Québec, Québec, Canada, G1K 9H5
-------------------------------------------------------------------------------
