In case this helps, here is the drive info :
# /sbin/hdparm -iI /dev/hde
/dev/hde:
Model=IBM-DJNA-371350, FwRev=J76OA30K, SerialNo=GM0GMHP0111
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=34
BuffType=DualPortCache, BuffSize=1966kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=26520480
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 *udma4
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-4 T13 1153D revision 17: 1 2 3 4
* signifies the current active mode
ATA device, with non-removable media
Model Number: IBM-DJNA-371350
Serial Number: GM0GMHP0111
Firmware Revision: J76OA30K
Standards:
Used: ATA/ATAPI-4 T13 1153D revision 17
Supported: 4 3 2 1 & some of 5
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 26520480
device size with M = 1024*1024: 12949 MBytes
device size with M = 1000*1000: 13578 MBytes (13 GB)
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 1966.0kB bytes avail on r/w long: 34 Queue
depth: 32
Standby timer values: spec'd by Standard, no device specific
minimum
R/W multiple sector transfer: Max = 16 Current = 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* NOP cmd
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
Release interrupt
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
Address Offset Reserved Area Boot
* READ/WRITE DMA QUEUED
* DOWNLOAD MICROCODE cmd
Security:
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
18min for SECURITY ERASE UNIT.
--
Nicolas Mailhot
Attachment:
signature.asc
Description: Ceci est une partie de message =?ISO-8859-1?Q?num=E9riquement?= =?ISO-8859-1?Q?_sign=E9e?=
