Hi list!
I'm having trouble booting the FC2 installer on a ThinkPad R40e (model
2684-QVG). I'm getting the following before it hangs:
...
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 0000:00:0f.0
ACPI: No IRQ known for interrupt pin A of device 0000:00:0f.0
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda:DMA hdb:pio
ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc:DMA hdd:pio
hda: HITACHI_DK23EA-30B, ATA DISK drive
using cfg io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: HL-DT-STDVD-ROM GDR8081N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: Host Protected Area detected.
¤current capacity is 52897589 sectors (27083 MB)
¤native capacity is 58605120 sectors (30005 MB)
hda: 52897589 sectors (27083MB) w/2048KiB Cache, CHS=55976/15/63, UDMA(100)
hda:
Any hints?
--
Christer Palm
