I set up a Durastor 6320SS under FC1. Initially, FC wouldnt automatically attach the external RAID, so I had to add the RAID's (single partition) host, channel, target id, and lum to a scsi add-single-device command, which went into /etc/rc.sysinit. This worked fine. However, under FC2, FC picked up the external RAID straight away. It was so efficient, that it loaded the SCSI controller driver the RAID was attached to, before it loaded the SCSI controller driver that my internal SCSI disk was attached to, reversing the labels of the drive. RAID became /dev/sda, and the internal became /dev/sdb.. I managed to fix this tho, and all is now well. Im using Adaptec cards, and a combination of the aic79xx and aic7xxx drivers. Cheers, Dan On Tue, 25 May 2004 18:49:08 -0700 Benjamin Arai <benjamin@xxxxxxxxxxxx> wrote: > Has anybody had any good experiences with RAID controllers under > Fedora? If so, which card and what happened. > > -- > Benjamin Arai <benjamin@xxxxxxxxxxxx> > Araisoft Corp. >
