On Tue, 2004-05-25 at 00:23, Steve Wampler wrote: > On Sun, 2004-05-23 at 12:23, mr mike wrote: > > Steve, > > > > I've had quite a few not so fun issues with my 2460, When I upgraded to > > the 1.05 BIOS things got a lot more stable. under FC1 it has been > > pretty solid. > > > > I only have a matrox G400, a linksys card, 2 hard drives, and a CD rom > > attached, nothing that draws a lot of power. > > Yes, that's not much load (I assume you also have CPU cooling > fans powered from the MB as well, of course). I had quite a bit > more. About all we had in common is the Matrix G400 (but replacing > that with a different graphics card did *not* help me.) > > -- > Steve Wampler -- swampler@xxxxxxxx > The gods that smiled on your birth are now laughing out loud. > I'm running a Tyan S2466N-4M (Tiger MPX) and all worked OK in installing Fedora. I have just two questions ... Have you connected ALL the power connectors to the Mother board?? (Yes I also mean the 4 pin one as well) And is the PSU at least 350Watts + As they need to be all connected when 2 CPU's are installed. (It's just a thought, since the board(s) I use, I have installed RH8.0, RH9, Fedora and RHEL3 WS without problems. And I mainly run Nvidia Video Cards in these systems.) Wolf
